Instructions Safety Instructions

Using the surface units.

Throughout this manual, features and appearance may vary from your model.

Using the Bridge Burner

To use the bridge burner, turn the control knob to the BRIDGE BURNER settings.

For full bridge burner operation, turn on the rear burner.

To use only the front burner, turn the control knob to the FRONT BURNER settings.

Cleaning Operating

Temperature Limiter

Every radiant surface unit has a temperature limiter.

The temperature limiter protects the glass cooktop from getting too hot.

The temperature limiter may cycle the units off for a time if:

■The pan boils dry.

■The pan bottom is not flat.

■The pan is off center.

■There is no pan on the unit.

Troubleshooting Tips Care and

Home Canning Tips

Be sure the canner is centered over the surface unit.

Make sure the canner is flat on the bottom.

To prevent burns from steam or heat, use caution when canning.

Use recipes and procedures from reputable sources. These are available from manufacturers such as Ball® and Kerr® and the Department of Agriculture Extension Service.

Flat-bottomed canners are recommended. Use of water bath canners with rippled bottoms may extend the time required to bring the water to a boil.

Consumer Support

Wok Cooking

We recommend that you use only a flat-bottomed

Do not use round bottom woks.

wok. They are available at your local retail store.

You could be seriously burned if the

Do not use woks that have support rings.

wok tipped over.

 

Use only flat-bottomed woks.

8

Page 7 Page 9
Page 8
Image 8
GE 164D4290P076 owner manual Instructions Safety Instructions, Cleaning Operating, Consumer Support
Page 7 Page 9

164D4290P076 specifications

The GE 164D4290P076 is a sophisticated and highly efficient component designed for aviation applications, specifically for use in aircraft systems. This product is a part of General Electric's broad portfolio of advanced technologies that cater to the needs of modern aviation, ensuring reliability and performance under varying operational conditions.

One of the primary features of the GE 164D4290P076 is its exceptional durability. Constructed from high-quality materials, this component is capable of withstanding extreme temperatures and pressures, making it ideal for the demanding environments encountered in flight operations. This emphasis on reliability translates into reduced maintenance costs and improved safety for aircraft operators.

In terms of technology, the GE 164D4290P076 incorporates advanced electronic controls and integration capabilities. This allows for seamless communication and interoperability with other avionics systems and components within the aircraft. The design leverages cutting-edge software and hardware to ensure real-time data processing, leading to enhanced system responsiveness and performance optimization.

Another significant characteristic of the GE 164D4290P076 is its energy efficiency. The design focuses on minimizing power consumption while maximizing output, a critical consideration in today’s aviation landscape where fuel efficiency is paramount. By reducing energy waste, this component not only supports sustainability initiatives within the industry but also lowers operational costs for airline operators.

Moreover, the GE 164D4290P076 is engineered to meet stringent regulatory and safety standards prevalent in the aviation sector. Its design and performance specifications adhere to guidelines established by aviation authorities, ensuring that it qualifies for certification and can be integrated into a wide variety of aircraft models.

Lastly, support and service are integral to the GE 164D4290P076’s value proposition. General Electric provides comprehensive maintenance and technical support for this component, helping operators manage their equipment efficiently throughout its lifecycle. This availability of support not only enhances user confidence but also contributes to the component's overall reliability and effectiveness in the field.

In summary, the GE 164D4290P076 stands out as a remarkable component in the aviation sector, combining durability, advanced technology, energy efficiency, regulatory compliance, and robust support services, making it an invaluable asset for modern aircraft systems.
Top Page Image Contents