Craftsman 247.795950 manual Trouble Shooting, HOW to ORDI-R Replacement Parts

Page 16

TROUBLE SHOOTING

PROBLEM

Engine fails to start

Loss of power; operation erratic

Engine overheats

Too much vibration

Unit does not discharge

Rate of discharge slows considerably or composition of discharged material changes

POSSIBLE CAUSE !(S)

Engine shut-off _,witch OFF.

Fuel shut-off val_'eclosed.

Fuel tank empty, or stale fuel.

Spark plug wire disconnected.

Faulty spark plu(.i.

Spark plug wire loose.

Unit running on (,HOKE.

Blocked fuel line or stale fuel.

Water or dirt in ftlel system.

Carburetor out o adjustment.

Dirty air cleaner.

Carburetor not a,Jjusted properly.

Engine oil level I_)w.

Loose parts or d;tmaged impeller.

Discharge chute clogged.

Foreign object Io :lged in impeller.

Shredding blade and/or chipper blades dull.

CORRECTIVE ACTION

Move to ON position.

Open fuel shut-off valve.

Fill tank with clean, fresh fuel.

Connect wire to spark plug.

Clean, adjust gap or replace.

Connect and tighten spark plug wire. Move choke lever to OFF position. Clean fuel line; fill tank with clean fresh gasoline.

Disconnect fuel line at carburetor to drain fuel tank. Refill with fresh fuel.

Adjust carburetor or contact your SEARS Service Center.

Service air cleaner. See Customer Responsibilities section of this manual.

Contact your SEARS Service Center.

Fill crankcase with proper oil.

Stop engine immediately and disconnect spark plug wire. Tighten all bolts and nuts.

Make all necessary repairs. If vibration continues, have unit serviced by a SEARS Service Center.

Stop engine immediately and disconnect spark plug wire. Clean flail screen and inside

of blower housing. See Service/Adjustments section of this manual.

Stop engine immediately and disconnect spark plug wire. Remove lodged object.

Sharpen or replace shredding and chipper blades.

NOTE: For repairs beyond the minor adjustm_ nts listed above, please contact your nearest SEARS Service Center.

HOW TO ORDI-R REPLACEMENT PARTS

Each chipper-shredder has its own model number. Each engine has its own model number.

The model number for your chipper-shredd_,_r will be found on a label attached to the frame.

The model number for the engine will be fou_ld on the blower housing of the engine.

All parts listed herein may be ordered throu(jh Sears, Roebuck and Co. Service Centers and mcst Retail Stores.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:

*PRODUCT - "5 H.P. Chipper-Shredder"

*MODEL NUMBER - 247.795950

*ENGINE MODEL NO. - 133412-0059-01

*PART NUMBER

*PART DESCRIPTION

Your Sears merchandise has added value when you consider that Sears has service units nationwide

staffed with Sears trained technicians...professional technicians specifically trained on Sears products, having the parts, tools and the equipment to insure

that we meet our pledge to you..."we service what we sell."

IF YOU NEED REPAIR

SERVICE OR PARTS:

REPAIR SERVICE 1-800-4-REPAIR

(1-800-473-7247)

ORDERING PARTS 1-800-FeN-PART

(1-800-366-7278)

16

Image 16
Contents Crrftsmrn 770-8473HFety Rules PreparationWarranty Product SpecificationsMaintenance Agreement Full ONE Year Warrantyon Craftsmangas CHIPPER-SHREDDERAccessories TABI.E ContentsIndex Assembly Instructions Tools Requiredfor AssemblyFlat --/1 Washer 16 I.D Hex Lock Nut 5/16-18 Thread Hex Bolt 16-18 x 8-3/8 LongAttachingthe Upper Guide Assembly Attaching the Hopper AssemblyHOWTOSET-UPYOURCHIPPER-SHREDDER Attaching the Catcher BAGMeets Ansi Safety Standards Engine SHUT-OFF SWITCHmUsed to stopOperation Know Your CHIPPER-SHREDDERMUM Into the Hopper ASSEMBLY. Material UP to a Maximum of 3 TostopengineHOWTOUSEYOURCHIPPER-SHREDDER Could ResultOIL Notper INCHUTEUSE. Door is Closed WhenGAS To Stop Engine To StartengineChoke Customer Responsibilities EngineGeneralrecommendations CHIPPER-SHREDDERAIR Cleaner Clean EngineFuel Filter Fler Area to Remove ALL Grass Dirt and Combustible DebrisStorage Service & AdjustmentRemoving the Flail Screen Chipper Blades Sharpeningor Replacingthe BladesShredding Blade Throttleadjustment CarburetoradjustmentTires FlailsHOW to ORDI-R Replacement Parts Trouble ShootingPart Number Part Description Sears Craftsman 5 H.P. CHIPPER-SHREDDER Model no Sears Craftsman 5 H.P. Chipp ER-SHREDDER Model no Requires Special Tools Assemblies include all parts shown in frames. JRepair Parts Assemblies include all parts shown in frames118 *493765 134 137111 535429 Carburetor Overhaul KIT Gasket SETCarburetor Gasket SET Irrftsmrn Mijlching and Bagging

247.795950 specifications

The Craftsman 247.795950 is a powerful and versatile snow blower designed to tackle the toughest winter conditions. With its robust construction and user-friendly features, it is an excellent choice for homeowners looking to keep their driveways and walkways clear of snow.

One of the standout features of the Craftsman 247.795950 is its strong engine. Powered by a dependable gas engine, this snow blower provides reliable performance, making it capable of clearing heavy snowfalls with ease. The engine is designed for efficient fuel consumption, ensuring that users can get the job done without constantly refueling.

The machine features a 24-inch clearing width, allowing it to clear a wide path in a single pass. This is particularly beneficial for those with larger driveways or property areas, as it reduces the time and effort needed to clear snow. The unit is equipped with an adjustable pitch auger that not only efficiently gathers and throws snow but also allows users to control the distance and direction of the snow discharge.

The Craftsman 247.795950 incorporates innovative technologies to enhance its usability. With its electric start feature, starting the snow blower in cold conditions becomes a hassle-free experience. This eliminates the need for tedious manual pulls while ensuring that the machine is ready to work when you are.

Another significant characteristic is its six-speed transmission, which includes two reverse speeds. This feature allows for greater control when navigating through challenging snow conditions, whether you're moving forward or backward. The ease of maneuverability is further enhanced by its large, heavy-duty tires, which provide excellent traction on slippery surfaces.

The snow blower is also designed with user comfort in mind. Its ergonomic handles are adjustable, allowing users to set them at a comfortable height. This feature reduces fatigue during prolonged use, making snow clearing less of a chore. Additionally, the hand warmers ensure that operators can work comfortably even in frigid temperatures.

Overall, the Craftsman 247.795950 stands out for its combination of power, efficiency, and user-centric features, making it a reliable tool for managing winter weather challenges. Whether facing light flurries or severe snowfall, this snow blower is engineered to perform efficiently, ensuring that winters are a little easier to navigate. Its durable construction and thoughtful features make it a solid investment for any homeowner.