Craftsman 247.795950 manual Fety Rules, Preparation

Page 2

S, .FETY RULES

WARNING: TO REDUCE THE PCTENTIAL FOR ANY INJURY, COMPLY WITH THE FOLLOWING I

SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH THE INSTRUCTIONS MAY RESULT IN I I&,PERSONALINJURY.

TRAINING

•Read this owner's manual carefully in its entirety before attempting to assemble or operate this machin_. Be com- pletely familiar with the controls and the proper Jse of this machine before operating it. Keep this manua in a safe

place for future and regular reference and fc" ordering replacement parts.

•Children must never be allowed to operate this e,luipment.

•No one should operate this unit while intoxicated or while taking medication that impairs the senses or re_Lctions.

•This equipment should never be operated in t_e vicinity of children, pets or other persons.

•Never run your machine in an enclosed ar,,,a as the exhaust from the engine contains carbon mono_ ida, which is an odorless, tasteless and deadly poisonous g is.

•Never place your hands or any part of your bod_'or cloth- ing inside the feeding chamber, discharge chul_, or near any moving part while the machine or engine is "unning.

•If it is necessary for any reason to inspect or repair the feeding chamber or any part of the machine wh_ re a mov- ing part can come in contact with your body c" clothing, stop the machine, allow it to cool, disconnect the spark plug wire from the spark plug and move it awa, r from the spark plug before attempting such inspection or r ;pair.

PREPARATION

•Wear safety glasses provided with your unit wh le operat- ing the chipper-shredder to prevent injury from _ny mate- rial which may be ejected out of the openings.

•Wear proper apparel. Avoid wearing loose fittin!l clothing. Wear gloves when handling material.

•HANDLE GASOLINE WITH CARE as it is an _xtremely flammable fuel.

•Check the fuel before starting the engine. Do ilot fill the fuel tank indoors, while the engine is running, el while the engine is still hot. Turn the unit off and let the engine cool before refueling.

•if the cutting mechanism strikes any foreign object or if your machine should start making an unusual noise or vibration, immediately stop the engine, disconnect the spark plug wire from the spark plug and move it away from the spark plug. Allow the machine to stop and take the following steps:

Inspect for damage.

Replace or repair any damaged parts.

Check for any loose parts and tighten to assure contin- ued safe operation.

•The engine must be kept clean of debris and other accu- mulations.

•Do not allow an accumulation of processed material to build up in the discharge area as this will prevent proper discharge and can result in kick-back from feed opening.

•Never place your hands or any other part of your body or clothing inside the feeding chamber, discharge chute or near any moving part while the engine is running.

•Keep all guards and deflectors in place and in good work- ing condition to assure continued safe operation.

•Always stand clear of the discharge area when operating this machine.

•Keep your face and body back from the feed opening to avoid accidental bounce back of any material.

•Do not over-reach. Keep proper balance and footing at all times.

•The engine governor settings on your machine must not be altered, changed, or tampered with. The governor controls the maximum safe operating speeds and pro- tects the engine and all moving parts from damage caused by overspeed.

•Do not transport machine while engine is running.

•Do not operate engine if air cleaner or cover directly over carburetor air intake is removed, except for adjustment. Removal of such parts could create a fire hazard.

•Fuel your chipper-shredder in a clean arez.. Do not smoke while refueling.

•Fuel tank cap must be secure at all times excE:pt during refueling.

•Avoid spilling gasoline or oil. Wipe the unit cle]n of any spilled fuel or oil.

•Store fuel and oil in approved containers, away from heat or open flame, and out of reach of children.

•This machine should be operated only upon a lew _1surface.

•Assure that all screws, nuts and bolts and other fasteners are properly secured.

OPERATION

•When feeding shreddable material into this e_luipment, be extremely careful that pieces of metal, rock_, bottles, cans or other foreign objects are not included. Personal injury or damage to the machine could result.

MAINTENANCE AND STORAGE

•When this equipment is stopped for servicing, inspection, storage or to change an accessory, make sure the spark plug wire is disconnected from the spark plug and moved away from the spark plug. The machine should be allowed to cool down before making such inspection, adjustments, service, etc. Maintain your machine with care and keep it clean for the best and continued safe operation.

•Do not use flammable solutions to clean the air filter.

•When not in use, your machine should be stored out of the reach of children. Keep where gasoline fumes will not reach an open flame or spark. For long periods of stor- age, refer to the "Storage" section of this manual.

&L]OK FOR THIS SYMBOL TO POINT OUTII_IPORTANT SAFETY PRECAUTIONS. ITI

lYEANS--ATTENTION!!! BECOME ALERT!!!]

 

Y Z)URSAFETY IS INVOLVED.

I

]

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Crrftsmrn 770-8473HFety Rules PreparationMaintenance Agreement WarrantyProduct Specifications Full ONE Year Warrantyon Craftsmangas CHIPPER-SHREDDERIndex TABI.E ContentsAccessories Flat --/1 Washer 16 I.D Hex Lock Nut 5/16-18 Thread Assembly InstructionsTools Requiredfor Assembly Hex Bolt 16-18 x 8-3/8 LongHOWTOSET-UPYOURCHIPPER-SHREDDER Attachingthe Upper Guide AssemblyAttaching the Hopper Assembly Attaching the Catcher BAGOperation Meets Ansi Safety StandardsEngine SHUT-OFF SWITCHmUsed to stop Know Your CHIPPER-SHREDDERHOWTOUSEYOURCHIPPER-SHREDDER MUM Into the Hopper ASSEMBLY. Material UP to a Maximum of 3Tostopengine Could ResultGAS Notper INCHUTEUSE. Door is Closed WhenOIL Choke To StartengineTo Stop Engine Generalrecommendations Customer ResponsibilitiesEngine CHIPPER-SHREDDERFuel Filter AIR CleanerClean Engine Fler Area to Remove ALL Grass Dirt and Combustible DebrisRemoving the Flail Screen Service & AdjustmentStorage Shredding Blade Sharpeningor Replacingthe BladesChipper Blades Tires ThrottleadjustmentCarburetoradjustment FlailsPart Number Part Description Trouble ShootingHOW to ORDI-R Replacement Parts Sears Craftsman 5 H.P. CHIPPER-SHREDDER Model no Sears Craftsman 5 H.P. Chipp ER-SHREDDER Model no Requires Special Tools Assemblies include all parts shown in frames. JRepair Parts Assemblies include all parts shown in frames111 118 *493765134 137 535429 Carburetor Gasket SET Gasket SETCarburetor Overhaul KIT Irrftsmrn Mijlching and Bagging

247.795950 specifications

The Craftsman 247.795950 is a powerful and versatile snow blower designed to tackle the toughest winter conditions. With its robust construction and user-friendly features, it is an excellent choice for homeowners looking to keep their driveways and walkways clear of snow.

One of the standout features of the Craftsman 247.795950 is its strong engine. Powered by a dependable gas engine, this snow blower provides reliable performance, making it capable of clearing heavy snowfalls with ease. The engine is designed for efficient fuel consumption, ensuring that users can get the job done without constantly refueling.

The machine features a 24-inch clearing width, allowing it to clear a wide path in a single pass. This is particularly beneficial for those with larger driveways or property areas, as it reduces the time and effort needed to clear snow. The unit is equipped with an adjustable pitch auger that not only efficiently gathers and throws snow but also allows users to control the distance and direction of the snow discharge.

The Craftsman 247.795950 incorporates innovative technologies to enhance its usability. With its electric start feature, starting the snow blower in cold conditions becomes a hassle-free experience. This eliminates the need for tedious manual pulls while ensuring that the machine is ready to work when you are.

Another significant characteristic is its six-speed transmission, which includes two reverse speeds. This feature allows for greater control when navigating through challenging snow conditions, whether you're moving forward or backward. The ease of maneuverability is further enhanced by its large, heavy-duty tires, which provide excellent traction on slippery surfaces.

The snow blower is also designed with user comfort in mind. Its ergonomic handles are adjustable, allowing users to set them at a comfortable height. This feature reduces fatigue during prolonged use, making snow clearing less of a chore. Additionally, the hand warmers ensure that operators can work comfortably even in frigid temperatures.

Overall, the Craftsman 247.795950 stands out for its combination of power, efficiency, and user-centric features, making it a reliable tool for managing winter weather challenges. Whether facing light flurries or severe snowfall, this snow blower is engineered to perform efficiently, ensuring that winters are a little easier to navigate. Its durable construction and thoughtful features make it a solid investment for any homeowner.
Top Page Image Contents