Safety Instructions | Gardena 4051 specification

GARDENA Petrol Lawnmower 46 V / 46 VD / 46 VDA / 51 VDA

2. Safety Instructions

Translation of the original German operating instructions. Please read these operating instructions carefully and observe the notes given. Use these operating instructions to familiarise yourself with the correct usage and safety instructions for the Petrol Lawnmower.

For safety reason children and young people under 16 and people who have not read these operating instructions must not use this Petrol Lawnmower. People with limited physical or mental capacities may only use the product if they are super- vised or instructed by a responsible person.

vPlease keep these operating instructions in a safe place.

Contents:	1.	Range of use for your GARDENA Petrol Lawnmower	16
	2.	Safety Instructions	17
	3.	Function	18
	4.	Assembly	19
	5.	Operation	20
	6.	Putting out of Operation	23
	7.	Maintenance	23
	8.	Trouble-Shooting	25
	9.	Technical Data	27
	10.	Service / Warranty	28

1. Range of use for your GARDENA Petrol Lawnmower

vPlease read the notes on safety on the petrol lawnmower.

Warning!

vPlease read the operating instructions before using the mower!

Danger!

Risk of injury!

vKeep bystanders away!

Danger!

Danger of injury from the blade bar!

vKeep fingers and feet away from sharp cutting tool!

DANGER!

Danger of asphyxiation from breathing in poisonous gases!

vThe mower must not be used in closed or poorly ventilated areas.

RISK OF EXPLOSION!

vDo not fill with fuel with the engine running!

DANGER OF COMBUSTION!

Engine is hot!

When doing this life the mower up at the front so that no petrol / oil gets into the air filter or exhaust.

Operation:

This petrol lawnmower can cause serious injuries! You are responsible for the safety of the working area.

Walk, never run.

Do not tilt the lawnmower when starting the engine or switching on the motor, except if the lawnmower has to be tilted for starting.

In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator. Do not tip the mower over to the side when mowing.

Do not start the engine when standing in front of the discharge chute.

Never lift or carry the mower with the engine running.

Only use the mower for the purposes outlined in the operating instructions.

Wear sturdy shoes and long trousers to protect your legs. Keep fingers and feet away from the blade bar and the ejection chute!

Make sure you always take up a safe and stable stance whilst working, especially on slopes.

Purpose:

Please note:

The GARDENA petrol lawnmower is designed for cutting lawns in and around the garden. Do not use the mower on a slope steeper than 20° maximum.

Warning! For environmental and transport safety reasons the petrol lawnmower is supplied without motor oil. Therefore, the crankcase of the engine must be filled with motor oil prior to use (see 7. Maintenance), otherwise the engine will be damaged!

To prevent injury, the lawnmower must not be used for trimming bushes, hedges, shrubs, for cutting and pruning of climbers or grass on roofs or in balcony boxes.

In addition, the lawnmower must not be used for chopping up branches, twigs or for levelling irregularities in the soil.

Warning!

vBefore working on the blade bar remove spark

plug connector. See the enclosed engine operating instructions!

Check each time you use the mower:

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or dama- ged blades and bolts in sets to preserve balance. Never operate the lawnmower with defective guards, or without safety devices, for example deflectors and/or grass catchers, in place. Replace damaged or worn parts. Never disable safety devices.

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

Check the grass to be cut before you start work. Remove any foreign bodies present (e. g. stones, branches).

The blade bar must be regularly checked for damage and if necessary repaired properly.

Be particularly careful if you change direction on a slope.

For wheeled rotary machines, mow across the face of slopes, never up and down.

Be careful when going backwards.

Risk of stumbling!

Look out for foreign bodies when working (e. g. stones).

Interruptions of work:

Do not leave the mower unattended in the workplace. Should you stop working store the mower in a safe place.

vRemove the spark plug connector!

Should you stop work to go to work some- where else with the mower, be sure to switch the mower off while you are going there.

Environmental influences:

Only work when visibility is good.

Familiarise yourself with the surroundings of your working area. Check for possible risks which might be not audible due to the noise of the machine.

4051 specifications

The Gardena 4051 is a versatile and innovative garden tool designed to simplify a variety of gardening tasks. Catering to both amateur gardeners and seasoned horticulturists, it features an array of functions that enhance productivity and ease of use in outdoor spaces.

One of the standout features of the Gardena 4051 is its ergonomic design. The tool is constructed with user comfort in mind, ensuring that it can be used for extended periods without causing strain. The handles are often designed to fit comfortably in the hand, reducing fatigue during operation. Furthermore, the lightweight materials used in its construction make it easy to maneuver, allowing users to carry out tasks seamlessly.

Equipped with advanced technology, the Gardena 4051 incorporates precision engineering for optimal performance. The cutting mechanism is a vital component, allowing for clean and efficient cuts whether pruning shrubs or tending to delicate plants. The blades are crafted from high-quality stainless steel, providing durability and sharpness that withstands the rigors of regular use. This enables gardeners to achieve professional results in their own backyards.

Another notable characteristic of the Gardena 4051 is its versatility. This tool typically combines several functionalities, allowing users to perform multiple gardening tasks without the need to switch between different tools. This all-in-one approach not only saves time but also minimizes clutter in the gardening shed.

Watering capabilities are also often incorporated into the Gardena 4051, making it a multifunctional tool. It may include options for adjustable spray patterns, from gentle mists for seedlings to powerful jets for more established plants. This flexibility ensures that various watering needs can be met with just one tool.

The Gardena 4051 is designed with user-friendly features as well, such as easy-to-reach controls and a quick-release function for attachments. Maintenance is straightforward, contributing to a seamless gardening experience.

In conclusion, the Gardena 4051 stands out as a premier gardening tool that integrates ergonomic design, cutting-edge technology, and multifunctionality. Its combination of durability, precision, and ease of use makes it an invaluable asset for anyone looking to cultivate and maintain a flourishing garden. Whether tackling big projects or everyday garden care, the Gardena 4051 is equipped to meet diverse horticultural needs.