Gardena 4044, 4047, 4046, 4061 manual Function

Page 3

GB

Make sure that there are no other people (especially children) or animals anywhere near the working area.

Stop the engine and disconnect the spark plug wire, make sure that all moving parts have

was spilled. You must not attempt to start the engine until the petrol vapours have dissipated.

To avoid the danger of fire, keep the engine and exhaust free from grass, leaves, grease or oil and away from combustible materials.

When mowing with the mulch unit the cut grass is returned to the grass as a self fertiliser and there are no waste lawn clippings.

4. Assembly

GB

 

 

 

 

 

 

come to a complete Stopp and, where a key is fitted remove the key: after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawnmower.

Never use the mower when it is raining or in damp or wet conditions.

Please observe any local restrictions or noise levels.

Petrol engine notes:

Warning! Fuel is highly inflammable. Fuel must be stored only in containers authorised for the

There is danger of carbon monoxide poisoning. Do not let the engine run in closed spaces.

When filling with petrol and oil, ensure that no foreign bodies (e. g. grass) get into the engine.

Always check the oil level before mowing.

For security reasons, replace the tank lid if damaged.

Never store a mower with fuel in the tank in a room where petrol fumes could come into contact with an open flame.

If the fuel tank has to be drained, this should be done outdoors.

Fitting the handle:

9

0

6

1.Push the screw 1 with the square washer 2 through the hole in the handle 3.

2.Put the handle lock 4 with

spring 5, handle 6 and round

6

washer 7 on the screw 1 and

 

tighten with the wing nut 8

 

When doing this the eyes 9

8

must be on the same side as the

starter cord 0.

3.Thread the starter cord 0 through the two eyes 9 on the handle 6.

93 2 1

7 454

purpose. The fuel must be filled only outdoors; do not smoke during filling. Fill with petrol prior to use; the petrol cap must not be removed and no petrol may be added if the engine is running or is hot. If petrol is spilled during filling, the engine must not be started until the spilled petrol has been wiped up and the mower has been removed from the area where the fuel

Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

Do not change the engine governor settings or overspeed the engine.

v Follow the enclosed engine operating instructions.

Fitting the collection bag

1.

Feed the bow-shaped handle q into the Collecting Bag so that

(44 V / 46 VD / 46 VDA):

 

the handle w is on the top.

 

 

2.

Fold the safety straps e around the handle q.

e

q

 

 

w

 

 

 

3. Function

Mowing tips:

If grass residue is left in the discharge opening, pull mower

 

backwards about 1 m so that the grass residue can drop out

 

downwards.

 

To produce a well-maintained lawn. we recommend cutting the

 

lawn regularly once a week if possible. The lawn becomes thicker

 

if cut frequently.

 

After relatively long intervals between mowing (holiday lawn),

 

first of all cut in one direction with the cutting height as high as

 

possible, then cut in the crosswise direction at the cutting

 

height required.

 

If possible, only cut the grass when it is dry, if the grass is damp,

 

the cutting pattern will be uneven.

Mulching tips:

You will achieve the best mulching results by cutting the grass

 

regularly once or twice a week depending on the amount the

 

grass has grown.

 

 

 

For mulching the grass must be mown no more than 1/3 of

 

its height. The cut height must be set at 4 cm at least (for

 

very dense grass the cut height may have to be set higher).

 

 

 

So that the grass mulch can rot down properly, mulch when the

 

grass is as dry as possible. Mulching is not recommended for

 

lawns with a great deal of moss or very matted grass. The moss

 

and weeds must be removed by scarifying.

18

 

e

Fitting the collection bag

 

1.

Place the collection bag cover r onto the collecting bag t

(51 VDA):

 

 

from the top so that ALL the eyes a are positioned over the

 

 

 

hook b.

 

r

2.

Push the Collecting Bag cover r down onto the collecting

 

 

bag t until all hooks b engage securely.

 

 

 

3. Fold the safety straps e around the handle.

a

ß

 

 

ß

b

t

e

 

19

Image 3
Contents PL P E I N FI DK S NL F GB D SK CZ Range of use for your Gardena Petrol Lawnmower Safety InstructionsFunction Mowing with the collection bag Starting the mower Adjust the handle inclinationOperation Mowing with mulch unitMowing with traction drive MaintenancePutting out of Operation Filling engine with petrolTrouble-Shooting Technical Data Service / Warranty Produkthaftung 2014051 40444046 4047Australia 204

4044, 4061, 4046, 4047 specifications

Gardena is a well-known brand in the realm of garden tools and irrigation systems, providing a wide range of products designed to enhance the gardening experience. Among its popular offerings are the Gardena 4046, 4047, 4044, and 4061 models, each boasting unique features, technologies, and characteristics that cater to different gardening needs.

The Gardena 4046 is a reliable, robust lawn mower known for its precision and efficiency. It features a powerful electric motor, making it suitable for residential lawns. One of its standout technologies is the innovative grass comb, which allows for cutting right up to the edges of your lawn, ensuring a clean finish. The adjustable cutting height provides flexibility, allowing users to choose the perfect length for their grass. Its lightweight design ensures that maneuvering around garden furniture and obstacles is effortless.

In contrast, the Gardena 4047 offers a more compact option for those with smaller gardens or limited storage space. This model retains the same quality of cut as the 4046 but is specifically engineered for ease of use. It is equipped with a foldable handle, making it easy to store in tight spaces. Additionally, it's designed with a noise-reduction feature, making mowing less disruptive to the surrounding environment.

The Gardena 4044, on the other hand, is a versatile tool, functioning as both a lawn mower and a mulcher. This dual functionality is made possible by its unique blade design, which chops grass into fine pieces, thereby enriching the soil and promoting healthier growth. The 4044 also incorporates a user-friendly interface, making it accessible for gardeners of all skill levels.

Finally, the Gardena 4061 stands out as a high-end model that combines advanced technology with user-centered design. It features sensor technology that adjusts the cutting pattern based on the grass's growth rate, ensuring optimal performance. The 4061 also showcases a larger cutting width, allowing for faster mowing of larger areas. Additionally, the model is equipped with a smart connectivity feature, enabling users to control the mower remotely via a mobile app.

In summary, the Gardena 4046, 4047, 4044, and 4061 models are all designed to cater to various gardening preferences and needs, ranging from precision and compactness to dual-functionality and smart technology. By combining innovative features with user-friendly designs, Gardena continues to be a leader in the gardening tools market.