1.Loopextensioncordthroughcord
retainer.
2.Insertcordreceptaclethroughloop.
3.Holdthecordreceptacleinone handUsetheotherhandtogently. pullontheextensioncordtore- moveslack. NOTE:Onlyremoveenoughslack fromtheextensioncordtosecureit tothecordretainerPullingtoohard. coulddamagetheextensioncord.
4.Insertthecordreceptacleintothe recessedplug.
KNOWYOURELECTRIC BLOWER
READ THIS OPERATOR'SMANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
ON/OFF | Top Handle |
| ||
Vents | Blower Tube | |||
Nozzle | ||||
|
|
| ||
| inlet |
|
ON/OFF SWITCH
The ON/OFF SWITCH is used to activate the motor.
STOPPING YOUR UNIT
To stop the unit, move the ON/OFF switch to the OFF (0) position.
STARTING YOUR UNIT
Move the ON/OFF switch to the ON (1) position to turn on the unit.
BLOWER TUBE AND NOZZLE
The BLOWER TUBE and NOZZLE are
designed to direct the flow of air.
OPERATING POSITION
Protection
WlTCH POSITIONS
1 = ON
0 = OFF
,zt
4tSWARNING: Do not use the unit
without the blower tubes properly at- tached to avoid flying debris and/or im- peller contact which can cause serious injury. Always wear eye protection to prevent rocks or debris from being
blown or ricocheting into the eyes and face which can result in blindness or
serious injury.
| BLOWER |
A |
|
,t_,WARNING: | Inspect the area be- |
fore using the unit. Remove all debris
and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown,
or otherwise cause injury or damage during operation.
Use your unit as a blower for:
•Sweeping debris or grass clippings from driveways, sidewalks, patios, etc.
•Blowing grass clippings, straw, or leaves into piles, or removing debris
from corners, around joints, or be- tween bricks.
6