Craftsman 316.79499 manual Rules for Safe Operation, Read ALL Instructions Before Operating

Page 3

RULES FOR SAFE OPERATION

The purpose of safety symbols is to attract your atten- tion to possible dangers. The safety symbols, and their explanations, deserve your careful attention and under- standing. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT: Indicatesdanger, warning or caution. Attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pictographs.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

Read the Operator’s Manual(s) and follow all warnings and safety instructions.

Failure to do so can result in serious injury to the operator and/or bystanders.

SYMBOL MEANING

DANGER: Failure to obey a safety warning will result in

serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

WARNING: Failure to obey a safety warning can

result in injury to yourself and others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

CAUTION: Failure to obey a safety warning may

result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

• IMPORTANT SAFETY INSTRUCTIONS •

READ ALL INSTRUCTIONS

BEFORE OPERATING

Read the instructions carefully. Be familiar with the con- trols and proper use of the unit.

WARNING: When using the unit, you must follow the

safety rules. Please read these instructions before operating the unit in order to ensure the safety of the operator and any by standers. Please keep these instructions for later use.

• Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.

• Children must not operate the unit. Teens must be accompanied and guided by an adult.

• All guards and safety attachments must be installed properly before operating the unit.

• Inspect the unit before use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secure. Replace parts that are cracked, chipped, or damaged in any way. Do not operate the unit with loose or damaged parts.

• Carefully inspect the area before starting the unit. Remove all debris and hard or sharp objects such as glass, wire, etc.

• Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders, and pets out- side a 50 feet (15 m.) radius; there still may be a risk to bystanders from thrown objects. Bystanders should be encouraged to wear eye protection. If you are approached, stop the unit immediately.

3

FUEL SAFETY WARNINGS

WARNING: Gasoline is highly flammable, and its

vapors can explode if ignited. Take the follow- ing precautions:

Store fuel only in containers specifically designed and approved for the storage of such material.

Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

Add fuel in a clean, well-ventilated outdoor area where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not smoke while fueling or mixing fuel. Wipe up any spilled fuel from the unit immediately. Always wipe unit dry before using.

Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke. Keep sparks and open flames away from the area while adding fuel or operating the unit.

Image 3
Contents Operator’s Manual Warranty Statement Table of ContentsFuel Safety Warnings Rules for Safe OperationRead ALL Instructions Before Operating While Operating Other Safety Warnings Safety and International Symbols Blower Components Know Your BlowerOIL and Fuel Mixing Instructions OIL and Fuel InformationAssembly Instructions Attach Flex TubeAttach Operating Tube Adjust Back Pack Harness and Control Handle STARTING/STOPPING InstructionsAttach Intermediate Tube and CON- Centrator Nozzle Stopping the Engine Important Idling InformationOperating Instructions Blower OperationsOperation Instructions Hours Maintenance and Repair InstructionsMaintenance Schedule Maintenance ChecklistIdle Adjustment AIR FilterFuel CAP / Fuel Filter Removing a Unit from Storage Spark Arrestor Screen Collar AssemblySpark Plug StorageUnit WON’T Start or Starts but will not RUN TroubleshootingEngine SpecificationsService Spare Parts List Specify Model NO. When Ordering Parts 30CC Back Pack Blower California / EPA Emission Control Warranty Statement

316.79499 specifications

The Craftsman 316.79499 is a versatile and powerful tool that stands out in the realm of a high-performance woodworking equipment. Recognized for its robust design and user-friendly features, this tool caters to both professional woodworkers and DIY enthusiasts alike.

One of the main features of the Craftsman 316.79499 is its strong motor that delivers exceptional performance across a range of applications. With a power output that allows for various speeds, users can adapt their work easily, ensuring precision and efficiency in every project. The tool is designed with adaptability in mind, making it suitable for cutting, shaping, and finishing tasks.

Another significant characteristic of the Craftsman 316.79499 is its ergonomic design. The tool is lightweight yet sturdy, allowing for comfortable handling over extended periods. This design consideration reduces user fatigue, making long work sessions more manageable. Additionally, the strategically placed grips enhance control, ensuring that even intricate cuts can be executed with precision.

In terms of technology, the Craftsman 316.79499 boasts several advanced features that enhance its functionality. One such feature is its built-in dust collection system. This technology helps maintain a clean workspace, reducing the need for frequent clean-ups and allowing users to focus on their craftsmanship. The dust collection system not only improves visibility but also promotes a healthier working environment.

Safety is also a top priority in the design of the Craftsman 316.79499. It comes equipped with multiple safety features, including a safety switch that prevents accidental starts, providing peace of mind during operation. Furthermore, the tool is designed to minimize vibration, which not only enhances control but also reduces the risk of hand fatigue.

In summary, the Craftsman 316.79499 is a well-rounded tool that combines power, versatility, and user-friendly features. Its strong motor, ergonomic design, and innovative technologies make it a reliable choice for woodworkers of all skill levels. Whether you are cutting, shaping, or finishing wood, the Craftsman 316.79499 stands ready to meet and exceed your expectations. With its commitment to safety and performance, it continues to be a popular choice in the woodworking community.