OIL and Fuel Information

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh, (less than 60 days old) clean unleaded fuel. Follow the instructions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxy- genates such as ethanol, methanol, or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate and leads to formation of acids during storage. When using alcohol- blended fuel, use fresh fuel.

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoid- able, follow recommended precautions:

•Always use the fresh fuel mix explained in your opera- tor's manual

•Always agitate the fuel mix before fueling the unit

•Drain the tank and run the engine dry before storing the unit

Using Fuel Additives

The bottle of 2-cycle oil that came with your unit contains a fuel additive which will help inhibit corrosion and mini- mize the formation of gum deposits. It is recommended that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for air-cooled engines along with a fuel additive, such as STA-BIL®Gas Stabilizer or an equivalent. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the instructions on the container. NEVER add fuel additives directly to the unit's fuel tank.

CAUTION: For proper engine operation and maxi-

mum reliability, pay strict attention to the oil and fuel mixing instructions on the

2-cycle oil container. Using improperly mixed fuel can severely damage the engine.

To Obtain Correct Fuel Mix:

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded gasoline in a separate fuel can. Use a 40:1 fuel/oil ratio. Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios.

NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 3.2 oz. (95 ml.) bottle of

2-cycle oil makes a 40:1 fuel/oil ratio.


			+
			+



UNLEADED GAS				2 CYCLE OIL

1 GALLON US				3.2 FL. OZ.
	(3.8 LITERS)			(95 ml)

		1 LITER		25 ml

MIXING RATIO - 40:1

WARNING: Gasoline is extremely flamma-

ble. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while fill- ing the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove fuel cap slowly to avoid injury

from fuel spray. Never operate the unit without the fuel cap securely in place.

WARNING: Add fuel in a clean, well ventilated out-

door area. Wipe up any spilled fuel immedi- ately. Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State and Local regulations.

316.79499 specifications

The Craftsman 316.79499 is a versatile and powerful tool that stands out in the realm of a high-performance woodworking equipment. Recognized for its robust design and user-friendly features, this tool caters to both professional woodworkers and DIY enthusiasts alike.

One of the main features of the Craftsman 316.79499 is its strong motor that delivers exceptional performance across a range of applications. With a power output that allows for various speeds, users can adapt their work easily, ensuring precision and efficiency in every project. The tool is designed with adaptability in mind, making it suitable for cutting, shaping, and finishing tasks.

Another significant characteristic of the Craftsman 316.79499 is its ergonomic design. The tool is lightweight yet sturdy, allowing for comfortable handling over extended periods. This design consideration reduces user fatigue, making long work sessions more manageable. Additionally, the strategically placed grips enhance control, ensuring that even intricate cuts can be executed with precision.

In terms of technology, the Craftsman 316.79499 boasts several advanced features that enhance its functionality. One such feature is its built-in dust collection system. This technology helps maintain a clean workspace, reducing the need for frequent clean-ups and allowing users to focus on their craftsmanship. The dust collection system not only improves visibility but also promotes a healthier working environment.

Safety is also a top priority in the design of the Craftsman 316.79499. It comes equipped with multiple safety features, including a safety switch that prevents accidental starts, providing peace of mind during operation. Furthermore, the tool is designed to minimize vibration, which not only enhances control but also reduces the risk of hand fatigue.

In summary, the Craftsman 316.79499 is a well-rounded tool that combines power, versatility, and user-friendly features. Its strong motor, ergonomic design, and innovative technologies make it a reliable choice for woodworkers of all skill levels. Whether you are cutting, shaping, or finishing wood, the Craftsman 316.79499 stands ready to meet and exceed your expectations. With its commitment to safety and performance, it continues to be a popular choice in the woodworking community.