TROUBLESHOOTINGTABLE
,_ WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that re- quire unit to be operating.
SYMPTOM
Unit fails to operate.
CAUSE
1.Switch in the OFF position.
2.Extension cord discon- nected.
REMEDY
1.Slide switch to ON position.
2.Reconnect extension cord.
3.Circuit breaker tripped, or fuse blown.
4.Mechanical failure
3.Reset circuit breaker or fuse.
4.Contact Sears Service (see back cover).
Unit | 1. | Mechanical | failure |
vibrates |
|
|
|
abnormally. |
|
|
|
Impeller will | 1. | Debris in air | intake area. |
not turn |
|
|
|
1.Contact Sears Service (see back cover).
1.Clean unit. Remove any debris.
freely. | 2. Mechanical failure. | 2. Contact Sears Service |
|
| (see back cover). |