Craftsman 315.21213 manual Blade, Flats, On Spindle, Washerwith, BuIrON

Page 14

LOWERPHILLIPS

BLADEGUARDSCREW

•Fit saw blade inside lower blade guard and onto spindle. The blade teeth point downward at the front of saw as shown in figure 11.

BLADE

BOLTCOVER

 

FLAT(S)

 

ON SPINDLE

TO

WASHERWITH

LOOSEN

DOUBLE"D" FLATS

 

BLADE

TIGHTEN

OUTERBLADEWASHER

 

 

WITH DOUBLE"D" FLATS

BLADEBOLT

Fig. 11

•Depress the spindle lock button and rotate the blade bolt until the spindle locks. See Figure 12.

•Using the blade wrench provided, loosen and remove the blade bolt.

Note: The blade bolt has left hand threads. Turn blade bolt clockwise to loosen.

•Remove outer blade washer. Do not remove inner blade washer.

A CAUTION: Always install the blade with the blade teeth and the arrow printed on the side of the blade pointing down at the front of the saw. The direction of blade rotation is also stamped with an arrow on the upper blade guard.

•Replace outer blade washer. The double "D" flats on the blade washers align with the flats on the spindle.

•Depress spindle lock button and replace blade bolt.

Note: The blade bolt has left hand threads. Turn blade bolt counterclockwise to tighten.

•Tighten blade bolt securely.

•Remove the blade wrench and store it in a safe place for future use.

•Replace the lower blade guard and blade bolt cover.

•Retighten phillips screw securing blade bolt cover. Tighten screw securely. See Figure 11.

_lL WARNING: Failure to tighten the phillips screw can result in serious personal injury.

A WARNING: Make sure the spindle lock button is not engaged before reconnecting saw into power source. Never engage spindle lock button when blade is rotating.

SPINDLE

BuI"rON

Fig. 12

•Wipe a drop of oil onto inner blade washer and outer blade washer where they contact the blade.

_l, WARNING: If inner blade washer has been removed, replace it before placing blade on

spindle. Failure to do so could cause an accident since blade will not tighten properly.

Your compound miter saw has been adjusted at the factory for making very accurate cuts. However, some of the components might have been jarred out of alignment during shipping. Also, over a period of time, readjustment will probably become necessary due to wear. After unpacking your saw, check the following adjustments before you begin using saw. Make any readjustments that are necessary and periodically check the parts alignment to make sure that your saw is cutting accurately.

WARNING: Your saw should never be connected to power supply when you are assembling pans, making adjustments, installing or removing blades, or when not in use. Disconnecting your saw will prevent accidental starting that could cause serious injury.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents This product Read and followInstructions before first use Customer Help LineFull ONE Year Warranty Remove Wrenches and Adjusting Keys Symbol MeaningSafety Alert Symbol Double InsulationRules for Safe Operation Always Stay ALERT! Do not allow familiarity Rules for Safe Operation RPM Rating Volts, 60Hz-AC Only Input Amperes Net Weight 32 IbsNo Load Speed 5000 Inch Compound Miter Saw Miterlockhandle SAW Blade BladewrenchDustguide Combination Square Framingsquare PhillipsscrewdriverThroatplate Know Your Compound Miter SAWAMP Motor LockplateSwrch Spindle Trigger LockSpindle Lock Button LOCKBUIrONElectric Brake Positive Stops on Miter TableBevel Lock Knob Miter FencePhillipsscrew Lower Bladeguard Exhaust Port Dustguide To Install BladeSerious personal injury Lowerblade GuardbracketOn Spindle BladeFlats WasherwithScrews Miter FenceSquaring Miter Table To the Fence Miter Fence Blade Miter Framing Table Square FenceMiter Fence Miter Framing Table Square Mm HexkeySquaring the Blade to Miter Table Miter Lockhandle Correctview of Blade Squarewith MitertableDepth Stop Travel Pivot AdjustmentBevel Pivot Adjustment To Crosscut with Your Miter SAW ApplicationsCutting with Your Compound Miter SAW CrosscuttingStraight Crosscut Clamp Left Side Rightside Indicator Point Scale MountingbracketTo Bevel CUT with Your Miter SAW Bevel CUTCompound Miter CUT Bevelcut Fence Screw ClampTo Make a Compound CUT with Your Miter SAW Compound Mitercut Lamp45x 45COMPOUNDMITERCUT Support Long WorkpiecesLongworkpiece Workpiecesupports 45.00 44.89 29.91 25.63 44.56 35.58 22.19 COMPOUND-ANGLE Settings for Popular StructuresPitch 14.51 10.65 17.37 44.14 35.37 22.14 17.72 17.93 00 MCutting Crown Molding Laying Molding Flat on Miter TableCutting Warped Material Bevel Angle Type of Cut Setting Left side, inside cornerWrong Clamping Wide WorkpiecesExtension Cords GeneralLubrication Partmay create a hazard or cause product damageFigureA Craftsman Compound Miter SAW Model NumberDescription Quan Craftsman Compound Miter SAW- Model NumberKEY Part NO. Number FigureB KEY Part Number Description Quan Figure C Parts List for Figure C Figure D Parts List for Figure D Get it fixed, at your home or ourst

315.21213 specifications

The Craftsman 315.21213 is a versatile and reliable tool designed for both professional tradespeople and DIY enthusiasts. This compact and powerful rotary tool is known for its impressive performance and a wide array of features that make it essential for a variety of tasks.

One of the main features of the Craftsman 315.21213 is its powerful motor, which provides robust performance capable of handling different materials including wood, metal, and plastic. This rotary tool boasts a variable speed control that allows users to adjust the RPM according to their specific needs, ranging from delicate tasks like engraving at lower speeds to more demanding applications such as grinding or cutting at higher speeds.

The 315.21213 is compatible with a vast selection of accessories, enabling it to effortlessly switch between tasks. With its easy-to-use chuck system, users can quickly swap out bits and attachments without the need for additional tools, ensuring that workflow remains efficient and uninterrupted. The adaptability of this rotary tool makes it a favored choice for intricate projects like jewelry making, model building, and home improvement tasks.

In terms of technology, the Craftsman 315.21213 incorporates a lightweight design that enhances its portability. Weighing just enough to allow for extended use without causing fatigue, this tool is also designed with user comfort in mind, featuring an ergonomic grip that provides a secure hold even during prolonged projects.

Safety is another key characteristic of the Craftsman 315.21213. The tool is equipped with an integrated safety switch that prevents accidental starts, providing peace of mind when handling various tasks. Additionally, its ventilation system helps manage heat during prolonged use, protecting the motor from overheating and improving overall durability.

The Craftsman 315.21213 stands out for its reliable performance and exceptional versatility. Whether you are tackling a small craft project or larger renovation tasks, this rotary tool delivers the quality and consistency needed to achieve professional results. With a combination of power, adaptability, and user-friendly features, the Craftsman 315.21213 is a top choice for those seeking a reliable and efficient rotary tool.
Top Page Image Contents