Craftsman 316.35084 manual Operatethisunitonly, Before Starting Engine

Page 10

Operatethisunitonly

WARNING: 0naweDventHatedoutdoor area. Carbon

monoxide exhaust fumes can be UethaUin a confined area.

Never operate the saw

WAR N _ N G: without the bar and

chain properUy

instaUUed.

BEFORE STARTING ENGINE

WARNING: Be sure to read the Oil and Fuel Information

.Section of this manuaH before you begin. If you do not understand the oH and fueHinformation, do not attempt

to fueHyour unit. For more information contact your

HocaHSears service center at1-800-4-MY- HOMEC¢.

GUIDE BAR AND CHAIN OIL

The bar and chain require Hubrication. The chain oiler provides continuous lubrication to the chain and guide bar. Be sure to fill the bar oil tank when you fill the fuel

tank. (Capacity = 6.8 ft. oz.). Lack of oil will quickly ruin the bar and chain. Too little oil will cause over-

heating with smoke coming from the chain and discol- oration of the bar. For maximum guide bar and chain life, we recommend you use Craftsman chain saw bar oil. If Craftsman bar oil is not available, you may use a good grade SAE 30 oil until you are able to obtain the Craftsman brand. The oil output is automatically metered during operation. Your saw will use approxi- mately one tank of bar oil for every tank of fuel mix. Always fill the bar oil tank when you fill the fuel tank.

FUEUNG THE ENGINE

WARNING: Remove fuel cap slowly when refueling.

This engine is certified to operate on unleaded gaso- line. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil.

We recommend Craftsman brand synthetic oil. Mix gasoline and oil at a ratio of 40:1.40:1 ratio is obtained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline. Included with this saw is a 3.2 ounce container of oil. Pour the entire contents of this

container into one gallon of gasoline to achieve the proper fuel mixture. DO NOT use automotive oil or boat oil. These oils will cause engine damage. When mixing fuel, follow the instructions printed on the oil container. Once oil is added to the gasoline, shake container momentarily to assure that the fuel is thor- oughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT:

Experience indicates that alcohol blended with fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and forma- tion of acids during storage. Acidic gas can damage the fuel system of an engine when in storage. To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage can occur. See STOR- AGE instructions for additional information.

CHAIN BRAKE

Be sure the chain brake is disengaged by pulling the front hand guard back toward the front handle as far as possible. The chain brake must be disengaged before cutting with the saw.

WARNING: The chain brake must not move when the engine runs at idle speed. If the chain brake moves at

idle speed, refer to CARBURETOR ADJUSTMENT in this manual. Avoid contact with the muffler. A hot muf-

fler can cause serious burns.

iMPORTANT POINTS TO REMEMBER

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly. For cold weather starting, start the unit at FULL CHOKE; allow the engine to warm up before squeezing the throttle trigger.

DO NOT attempt to cut material with the choke/fast idle lever in the FULL CHOKE position.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operators Manual Sears, Roebuck and Co., Hoffman Estates, L 60179, U.S.AEngine Exhaust from THiS Safety mNSTRUCTmONS Operate Your SAW SafelyKickback Safety Precautions Shutoff theenginebeforesettingthechainsawdownAvoidacddentaistarting,Beinthestartingposition Other Safety Precautions Donotstartacutusingthetip of thesawFuel Safety ON/OFF Control Safety Features CHAroN SAW ComponentsKICKBACKSPECiFiCS 95rnm OraLAND Fuel MmXmNG mNSTRUCTmONSOperatethisunitonly Before Starting EngineSTARTmNG a Cold ENGmNE STARTmNG a Warm ENGmNEWARNmNG WARNmNG atreethathasbeenNever walk in front of m BUCKmNG UMBmNGBUOKmNG USmNG a Sawhorse Maintenance Checklist Hours of Opera Each USE Tion IVAmNTENANCE ScheduleRemoving Guide BAR and Chain Replacing Guide BAR and ChainSAW CHAroN Tension Adjustment AiR Filter Fuel FilterSpark Arrester Screen OraLFILTERSpark Plug Gude BAR Mantenance STORmNGA CHAroNSAWREMOVmNG a UNmT from Storage SAW Chain / BAR LubrcatonGuide BAR Maintenance CHAroN MaintenanceDealer Fouled Spark plug RPM RPM 9NAB NUT California / EPA Emission ControJ Warranty Statement U..,,,,,1

316.35084 specifications

The Craftsman 316.35084 is a versatile and reliable tool that has been designed to meet the needs of both professionals and DIY enthusiasts. Known for its durability and ease of use, this tool is a valuable addition to any workshop. Whether you are tackling home improvement projects or working on a professional job site, the 316.35084 is built to deliver performance that you can count on.

One of the main features of the Craftsman 316.35084 is its robust motor. With a powerful output, it allows for quick and efficient operation, making tasks like cutting, sanding, and drilling much easier. The motor has been engineered to provide high torque, which ensures that even tough materials can be handled with ease. This is particularly important for users who often work with dense woods or metals.

Another standout feature of this tool is its ergonomic design. The handle is crafted for comfort, allowing for a secure grip during extended use. This emphasis on user comfort not only enhances overall productivity but also reduces the risk of fatigue. In addition, the lightweight construction of the Craftsman 316.35084 makes it easy to maneuver, facilitating precision work in various environments.

Technologically, the Craftsman 316.35084 incorporates advanced features that enhance its functionality. For instance, it comes with multiple speed settings that can be adjusted according to the specific task at hand. This flexibility allows users to optimize the tool's performance, whether they need to achieve fine details or take on heavier-duty work. The tool also features a quick-change accessory system, enabling users to switch between different attachments with minimal downtime.

Safety is another critical characteristic of the Craftsman 316.35084. It comes equipped with built-in safety features, such as a protective casing and automatic shut-off mechanisms, which help prevent accidents during operation. This focus on safety ensures that users can work confidently without compromising their well-being.

Overall, the Craftsman 316.35084 stands out in the market for its combination of powerful performance, user-centric design, and safety features. With its ability to handle a variety of tasks effectively, it earns its place as a go-to tool for anyone serious about their crafting or construction endeavors. Whether you are a seasoned pro or just starting out, the 316.35084 is a tool that you can trust to get the job done right.
Top Page Image Contents