Craftsman 536.7722 manual Lubrication, To Change Engine OIL, AIR Cleaner

Page 11

:'RODUCT

SPECIFICATIONS

HORSE POWER:

3.8

DISPLACEMENT:

10

cu. in. (163cc)

GASOLINE

CAPACITY:

1.25 qt.

 

 

(unleaded regular)

LUBRICATION:

20

oz. SAE-30W

SPARK PLUG:

Champion RJ19LM

(Gap .030)

 

or Equivalent

NOTE: The quill assembly bearings are

factory sealed and will require no lubrica- tion.

•Reconnect the spark plug wire on the spark plug.

Oil Drain Plug

GENERAL RECOMMENDATIONS

The warranty on this Edger does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must main- tain the Edger as instructed in this manual. The above chart is provided to assist the operator in propedy maintaining the Edger.

LUBRICATION

•After each 25 hours of use of your Edger, apply light machine oil to all moving parts.

•We recommend that the oil in the engine crankcase be changed after each 25 hours of use thereafter.

NOTE: If the Edger is being used in sandy or dusty areas, change the oil more fre- quently to prevent premature engine wear.

TO CHANGE ENGINE OIL

•Disconnect the spark plug wire from the spark plug.

•Remove the oil drain plug as shown in first figure on this page and drain the oil into a flat pan.

•After draining all the oil, reinstall the oil drain plug securely.

NOTE: The oil will drain more freely when the engine is warm.

•Remove the oil fill cap/dipstick. See first figure on page 9.

•Fill the engine crankcase, pouring slowly.

DO NOT OVERFILL. For approximate ca- pacity see PRODUCT SPECIFICA-

TIONS on this page.

AIR CLEANER

Replace the filter once a year; more often under dusty or dirty conditions. DO NOT attempt to clean or oil the air filter.

To install a new air filter, do the following:

•Disconnect the spark plug wire from the spark plug.

•Tum the cover as shown below to the left (counterclockwise) and remove the cover and the air filter from the flange.

•Discard the air filter.

•Clean the cover and the flange thor- oughly.

•Insert the new air filter into the cover.

•Push the cover firmly against the flange and tum it to the right (clockwise) as far as it will go as shown in figure below. Be sure the retainers are locked around the flange.

•Reconnect the spark plug wire.

i_

T_PT'uumcover to the left

 

! coun,ockw,s°rc,

 

Flange,

 

liner

 

Slot

 

Tab

 

to the right

 

(clockwise)

 

to install

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents EDGER/BEVEL CUT Before USE Limited TWO-YEAR Warranty on Craftsman EdgerFuel Safety Safe Storage REPAIR/ADJUSTMENTS SafetyOperating Safety Contents of Parts Bag shown full size Checklist Know Your Edger To USE Primer Butfon HOW to USE Your EdgerTo Stop Edger To USE the Engine Control LeverBefore Starting Engine To USE the Depth Control LeverTo Start the Engine Fill GASEdging Tips Customer Responsibilities Service Schedule Records DatesTo Change Engine OIL AIR CleanerLubrication Bladereplacement Belt ReplacementCarburetor Adjustment Engine EdgerCorrection Trouble CauseEngine 3OOPart Name Handle Assembly 106 138 117 104 Decals 812 805 810I3o9 Craftsman REF Part NO. NO. Part Name Part Part NameCraftsman 4-CYCLE Engine Part

536.7722 specifications

The Craftsman 536.7722 is a versatile and robust snow blower that has become a favorite among homeowners for its efficiency and reliability in clearing snow during harsh winter months. This model is designed to handle various snow conditions, making it an ideal choice for those living in areas with heavy snowfall.

One of the standout features of the Craftsman 536.7722 is its powerful engine. It is equipped with a reliable 5.5 horsepower engine that provides ample power to tackle even the toughest snow accumulation. The engine is designed for easy start-up, ensuring that users can get to work quickly without the fuss of traditional pull-start mechanisms.

The snow blower features a 22-inch clearing width, allowing it to efficiently clear paths, driveways, and sidewalks in a single pass. This larger width reduces the time and effort needed to clear snow, making it an efficient choice for both small and medium-sized areas. The adjustable chute is another highlight of the Craftsman 536.7722. It allows users to control the direction and distance the snow is thrown, with a rotation capability of up to 190 degrees. This feature enables precise snow removal and prevents the need for repeated passes over the same areas.

The Craftsman 536.7722 is also equipped with an innovative auger system, which enhances its snow-clearing capabilities. The heavy-duty auger is designed to break down and scoop up snow with ease, ensuring that even packed snow can be cleared effectively. The snow blower operates with a two-stage system, which means the auger collects the snow and sends it to an impeller that throws it out of the chute, allowing for efficient snow dispersal.

In addition to its performance features, the Craftsman 536.7722 is built with comfort in mind. The ergonomic handles are designed for ease of use, and they can be adjusted to suit different user heights. The snow blower’s compact design allows for easy maneuverability in tight spaces, making it ideal for residential use.

Overall, the Craftsman 536.7722 combines power, efficiency, and user-friendly features, making it a reliable tool for anyone looking to keep their property clear of snow throughout the winter season. With its robust construction and advanced technology, this snow blower stands out as a top contender in the market for homeowners seeking effective snow removal solutions.
Top Page Image Contents