Craftsman 536.7722 manual Belt Replacement, Bladereplacement

Page 12

CAUTION: Never run the engine without the air cleaner element installed. A defective air cleaner can result in loss of

engine power and can cause excessive wear or damage to the engine components if dirt or dust is permitted to enter the engine through the carburetor. A damaged air cleaner, or one that is clogged with dust or dirt should be replaced immediately.

SPARK PLUG

Clean the spark plug and reset the gap periodicany. Clean the area around the spark plug base before removal, to prevent dirt from entering the engine. Replace the spark plug if the electrodes are pitted or

Z_ CAUTION: Always stop the engine and disconnect the spark plug wire before making any repairs to the Edger.

burned or if the porcelain is cracked. Clean the spark plug by carefully scraping the electrodes (do not sand blast or use a wire brush). Be sure the spark plug is clean and free of foreign material. Check the elec- trodes gap with a wire feeler gauge and reset to .030 inches if necessary. If a new spark plug is needed, refer to the PROD- UCT SPECIFICATIONS on page 11 for the proper replacement spark plug.

Before reinstalling the spark plug, coat the threads lightly with graphite or light oil to insure easy removal. Tighten the spark plug firmly into the engine. If a torque wrench is available, torque the spark plug to 15 foot- pounds.

V-BELT REPLACEMENT

Your Edger is equipped with a V-belt made of a special compound. If the belt becomes worn or breaks, replace it with an original

equipment belt as shown in the Repair Parts section of this manual. Never use a substitute.

•Disconnect the spark plug wire.

•Drain gasoline and oil from Edger.

•Tip Edger backwards on handle and block top of handle against wall or bench.

•Remove three screws from the belt guard as shown in first figure.

•Push blade bearing housing back towards engine to compress spring and release tension on belt.

•Remove old belt (carefully note direction of twist around engine pulley). See second figure.

•While spring is compressed, install new belt on quill and engine pulleys being sure to twist belt in proper direction as shown in second figure.

NOTE: If belt is not installed propedy the blade will not turn in the proper direction and could damage the blade or belt. Refer to second figure for proper direction of belt travel.

e Pulley

Spring

twist

V-Belt

BLADEREPLACEMENT

The cutting blade is subject to wear and damage such as nicks and dents. This will not generally affect its function.

This blade is specially designed to not re- quire sharpening. Do not attempt to sharpen this blade. If wom or damaged the blade should be replaced.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents EDGER/BEVEL CUT Limited TWO-YEAR Warranty on Craftsman Edger Fuel SafetyBefore USE REPAIR/ADJUSTMENTS Safety Operating SafetySafe Storage Contents of Parts Bag shown full size Checklist Know Your Edger HOW to USE Your Edger To Stop EdgerTo USE the Engine Control Lever To USE Primer ButfonTo USE the Depth Control Lever Before Starting EngineFill GAS To Start the EngineCustomer Responsibilities Service Schedule Records Dates Edging TipsAIR Cleaner LubricationTo Change Engine OIL Belt Replacement BladereplacementCarburetor Adjustment Edger EngineTrouble Cause Correction3OO Part NameEngine Handle Assembly 106 138 117 104 812 805 810 DecalsI3o9 Craftsman Part Part Name REF Part NO. NO. Part NameCraftsman 4-CYCLE Engine Part

536.7722 specifications

The Craftsman 536.7722 is a versatile and robust snow blower that has become a favorite among homeowners for its efficiency and reliability in clearing snow during harsh winter months. This model is designed to handle various snow conditions, making it an ideal choice for those living in areas with heavy snowfall.

One of the standout features of the Craftsman 536.7722 is its powerful engine. It is equipped with a reliable 5.5 horsepower engine that provides ample power to tackle even the toughest snow accumulation. The engine is designed for easy start-up, ensuring that users can get to work quickly without the fuss of traditional pull-start mechanisms.

The snow blower features a 22-inch clearing width, allowing it to efficiently clear paths, driveways, and sidewalks in a single pass. This larger width reduces the time and effort needed to clear snow, making it an efficient choice for both small and medium-sized areas. The adjustable chute is another highlight of the Craftsman 536.7722. It allows users to control the direction and distance the snow is thrown, with a rotation capability of up to 190 degrees. This feature enables precise snow removal and prevents the need for repeated passes over the same areas.

The Craftsman 536.7722 is also equipped with an innovative auger system, which enhances its snow-clearing capabilities. The heavy-duty auger is designed to break down and scoop up snow with ease, ensuring that even packed snow can be cleared effectively. The snow blower operates with a two-stage system, which means the auger collects the snow and sends it to an impeller that throws it out of the chute, allowing for efficient snow dispersal.

In addition to its performance features, the Craftsman 536.7722 is built with comfort in mind. The ergonomic handles are designed for ease of use, and they can be adjusted to suit different user heights. The snow blower’s compact design allows for easy maneuverability in tight spaces, making it ideal for residential use.

Overall, the Craftsman 536.7722 combines power, efficiency, and user-friendly features, making it a reliable tool for anyone looking to keep their property clear of snow throughout the winter season. With its robust construction and advanced technology, this snow blower stands out as a top contender in the market for homeowners seeking effective snow removal solutions.
Top Page Image Contents