Craftsman 127.28875 manual Operating Notes, Driving

Page 22

OPERATION

OPERATING NOTES

-Practice at slow engine and travel speeds with the PTO off until fully familiar with the controls.

-For normal cutting the throttle should be set at the full open position. By using the traction levers to speed up or slow down the machine during use, maximum control and cutting efficiency can be maintained.

-Using the machine at less than full throttle in heavy conditions will cause the engine to labor and result in excessive wear.

Driving

1.With the PTO disengaged, move the parking brake to OFF.

2.Move both traction levers out of neutral lock.

3.Push both traction levers forward evenly to drive forward in a straight line. Pull both traction levers back evenly to drive backward in a straight line.

4.Steering - Move one lever forward and one back.

Turns during forward movement:

-Right turn - move the right traction lever back toward neutral to slow the right drive wheel.

-Left turn - move the left traction lever back to- ward neutral to slow the left drive wheel.

Turns during reverse movement:

-Reverse right turn - move the right traction lever forward toward neutral to slow the right drive wheel.

-Reverse left turn - move the left traction lever forward toward neutral to slow the left drive wheel.

use caution when making turns. Slow down before making sharp turns to help maintain control and to prevent torn turf from skidding or spinning tires. To help prevent turf damage, keep both drive tires mov- ing whenever a turn is made.

TIP: The best way to make a sharp "zero" turn is to come to a stop, get the machine moving in reverse with both drive wheels and then power the machine around with the outside wheel. This technique keeps the drive tires turning and results in less turf damage.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Zero Turn Riding Mower Sears Craftsman Help LineProposition 65 Warning CaliforniaWash Hands After Handling Warranty Signal word definitions SafetyBecome Alert Site preparation and circumstances Preparing for Safe OperationMachine preparation GeneralStarting Interrupting operationMowing slopes Blades FuelBattery Warning Transportation and Storage SafetyLabels Labels Labels Labels Labels Choke C Volt Power OutletControls At operators right side Below seatFuel Selector Valve U Turns during forward movement Lift and traction levers operators right sideTurns during reverse movement Pushing the machine Parking brake in on position Operators left sidePRE-OPERATION Check List PRE-OPERATION Check List OPERATOR’S ResponsibilityOperator Presence OperationFueling Starting the EngineOperating Notes DrivingCutting Cutting TipsMaintenance Chart Repair Protection Agreements Maintenance RecordHeres what the Repair Protection Agreement* includes Battery MaintenanceCheck Daily Lubrication Engine OIL Spark PlugsDual Element AIR Cleaner Fuel FilterSpecific Torques Engine CoolingPurging Transaxles Transaxles Transaxle Fluid ChangeSharpening Blade installationBlade Removal Blade BalanceDeck Leveling AdjustmentsHeight of cut ranges for roller adjustment Height of cutParking Brake HydrostatIC Transaxle adjust- mentS NeutralHydro Transaxle Drive belt Belt ReplacementCutterdeck belt Belt TensionGet it fixed, at your home or ours MY-HOME1-800-469-4663

127.28875 specifications

The Craftsman 127.28875 is a versatile and reliable tool that stands out in the world of power tools and home improvement equipment. Designed with the DIY enthusiast and professional contractor in mind, this tool combines functionality, durability, and advanced technology to meet various project needs.

One of the primary features of the Craftsman 127.28875 is its powerful motor. Equipped with high-performance capabilities, it efficiently tackles both light-duty and heavy-duty tasks, allowing users to complete their projects with ease and confidence. Whether drilling through wood, metal, or plastic, the motor ensures consistent performance, minimizing downtime and maximizing productivity.

The tool's ergonomic design is another significant highlight. It features a comfortable grip and well-balanced body, reducing user fatigue during extended work sessions. The lightweight construction contributes to its maneuverability, making it an ideal choice for overhead tasks or tight spaces. Additionally, the placement of controls is user-friendly, facilitating effortless adjustments while maintaining focus on the job at hand.

Technologically, the Craftsman 127.28875 includes advanced features like variable speed settings. This allows users to adapt the speed based on the specific material and application, providing greater precision and control. The integrated LED work light also enhances visibility, ensuring that users can see their work clearly, regardless of the lighting conditions.

Another noteworthy characteristic is the tool's compatibility with various attachments and accessories. This versatility enables users to customize their setup according to the demands of their projects, which can range from drilling and screwing to sanding and polishing. The quick-change chuck system further accelerates the swapping of bits, streamlining workflows.

Durability is a hallmark of any Craftsman product, and the 127.28875 is no exception. Built with robust materials that withstand the rigors of daily use, this tool is designed to endure tough job sites. The incorporated safety features, such as overload protection, also enhance its longevity, giving users peace of mind during operation.

In summary, the Craftsman 127.28875 is a powerful and versatile tool that is ideal for both casual DIYers and seasoned professionals. With its robust motor, ergonomic design, advanced technology, and compatibility with various accessories, it offers a comprehensive solution for a wide range of applications. Investing in this tool means investing in efficiency, durability, and enhanced performance for all your project needs.
Top Page Image Contents