Craftsman 127.28875 manual Engine OIL, Spark Plugs

Page 28

MAINTENANCE

ENGINE OIL

Perform engine maintenance with the engine off, spark plug wires disconnected and PTO disengaged.

AFTER FIRST FIVE (5) HOURS

While the engine is warm:

1.Remove drain cap at location D and drain the crankcase. Dispose of used oil in accordance with local requirements.

2.Clean and replace the cap.

3.Change oil filter.

4.Fill the crankcase with fresh oil to the full mark.

Do not overfill. See engine manual for oil specifications.

DAILY

1.Check oil level with the dipstick.

2.If oil is needed, add fresh oil of proper viscosity and grade. See engine manual for oil specifications. Do not overfill.

3.Replace dipstick before starting engine.

PERIODIC OIL CHANGES

1.See Page 22 maintenance chart for oil and filter change intervals after the break-in period.

2.Follow instructions for first oil change, above.

OIL CAPACITY

Engine without oil filter holds approximately 1-7/8 quarts (60 ounces; 1.8 liters).

Engine equipped with oil filter holds approximately 2 quarts (64 ounces; 1.9 liters).

Use a high quality detergent oil classifed "For Service SF, SG, SH, SJ" or higher.

Use recommended SAE viscosity grade oil per start- ing temperature according to Figure 1.

Figure 1

Synthetic SW-30, 10W-30

Spark Plugs

Remove each plug and check condition.

-Good operating conditions are indicated if the plug has a light coating of grey or tan deposit.

-A white blistered coating indicates overheating. A black coating indicates an “over rich” fuel mixture.

Both may be caused by a clogged air cleaner or improper carburetor adjustment.

-Do not sandblast, wire brush or otherwise attempt to repair a plug in poor condition. Best results are obtained with a new plug.

-Set plug gap as specified in engine manual..

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Zero Turn Riding Mower Sears Craftsman Help LineProposition 65 Warning CaliforniaWash Hands After Handling Warranty Signal word definitions SafetyBecome Alert Site preparation and circumstances Preparing for Safe OperationMachine preparation GeneralStarting Interrupting operationMowing slopes Blades FuelBattery Warning Transportation and Storage SafetyLabels Labels Labels Labels Labels Volt Power Outlet ControlsChoke C At operators right side Below seatFuel Selector Valve U Turns during forward movement Lift and traction levers operators right sideTurns during reverse movement Pushing the machine Parking brake in on position Operators left sidePRE-OPERATION Check List PRE-OPERATION Check List OPERATOR’S ResponsibilityOperation FuelingOperator Presence Starting the EngineOperating Notes DrivingCutting Cutting TipsMaintenance Chart Repair Protection Agreements Maintenance RecordHeres what the Repair Protection Agreement* includes Battery MaintenanceCheck Daily Lubrication Engine OIL Spark PlugsDual Element AIR Cleaner Fuel FilterSpecific Torques Engine CoolingPurging Transaxles Transaxles Transaxle Fluid ChangeBlade installation Blade RemovalSharpening Blade BalanceAdjustments Height of cut ranges for roller adjustmentDeck Leveling Height of cutParking Brake HydrostatIC Transaxle adjust- mentS NeutralBelt Replacement Cutterdeck beltHydro Transaxle Drive belt Belt TensionGet it fixed, at your home or ours MY-HOME1-800-469-4663

127.28875 specifications

The Craftsman 127.28875 is a versatile and reliable tool that stands out in the world of power tools and home improvement equipment. Designed with the DIY enthusiast and professional contractor in mind, this tool combines functionality, durability, and advanced technology to meet various project needs.

One of the primary features of the Craftsman 127.28875 is its powerful motor. Equipped with high-performance capabilities, it efficiently tackles both light-duty and heavy-duty tasks, allowing users to complete their projects with ease and confidence. Whether drilling through wood, metal, or plastic, the motor ensures consistent performance, minimizing downtime and maximizing productivity.

The tool's ergonomic design is another significant highlight. It features a comfortable grip and well-balanced body, reducing user fatigue during extended work sessions. The lightweight construction contributes to its maneuverability, making it an ideal choice for overhead tasks or tight spaces. Additionally, the placement of controls is user-friendly, facilitating effortless adjustments while maintaining focus on the job at hand.

Technologically, the Craftsman 127.28875 includes advanced features like variable speed settings. This allows users to adapt the speed based on the specific material and application, providing greater precision and control. The integrated LED work light also enhances visibility, ensuring that users can see their work clearly, regardless of the lighting conditions.

Another noteworthy characteristic is the tool's compatibility with various attachments and accessories. This versatility enables users to customize their setup according to the demands of their projects, which can range from drilling and screwing to sanding and polishing. The quick-change chuck system further accelerates the swapping of bits, streamlining workflows.

Durability is a hallmark of any Craftsman product, and the 127.28875 is no exception. Built with robust materials that withstand the rigors of daily use, this tool is designed to endure tough job sites. The incorporated safety features, such as overload protection, also enhance its longevity, giving users peace of mind during operation.

In summary, the Craftsman 127.28875 is a powerful and versatile tool that is ideal for both casual DIYers and seasoned professionals. With its robust motor, ergonomic design, advanced technology, and compatibility with various accessories, it offers a comprehensive solution for a wide range of applications. Investing in this tool means investing in efficiency, durability, and enhanced performance for all your project needs.
Top Page Image Contents