Craftsman 127.28875 manual Starting, Interrupting operation

Page 7

SAFETY

Starting

-Start only according to instructions in this manual or on the machine.

-Before attempting to start the engine, make sure:

-the parking brake is on;

-the PTO is disengaged;

-the traction drive is in NEUTRAL.

-When starting the engine, make sure hands and feet are clear of the blades.

-Do not start the machine while standing in front of the discharge chute or with the chute directed at someone.

-Do not engage PTO at full throttle. Throttle to idle or lowest possible engine speed.

-Do not change engine governor settings or over-speed the engine. Operating the engine at excessive speed can increase the hazard of personal injury.

Interrupting operation

-Before leaving the operator's position:

-Park on level ground.

-Disengage the PTO.

-Set the parking brake.

-Shut off the engine and remove the key.

-Disengage the PTO and wait until the blades quit rotating:

-before raising cutterdeck;

-when not mowing;

-for transport;

-when crossing surfaces other than grass.

-Stop the engine, disengage the PTO, set parking brake and wait until the blades quit rotating and lower cutting unit:

-before refueling;

-before removing grass catcher;

-before making height adjustment unless the adjustment can be made from the operator's position.

-Stop the engine, disengage the PTO, set parking brake and disconnect the spark plug wire(s) or remove the key:

-before clearing blockages or unclogging chute;

-before checking, cleaning or working on the machine;

-after striking a foreign object. Inspect the machine for damage and make repairs before restarting;

-if the machine begins to vibrate abnormally: shut off machine immediately. Inspect and make repairs as needed before restarting;

-except for repairs or adjustments as specifically noted, such as for carburetor adjustment, where the engine must be running. Keep hands and feet clear of moving parts in these circumstances.

-Allow the blades to come to a complete stop when stopping operation to clear blockages, unclog, inspect the machine, do maintenance or repair.

-Reduce the throttle setting during engine shut- down and, if the engine is provided with a shut- off valve, turn the fuel off at the conclusion of mowing.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Sears Craftsman Help Line Zero Turn Riding MowerProposition 65 Warning CaliforniaWash Hands After Handling Warranty Signal word definitions SafetyBecome Alert Preparing for Safe Operation Site preparation and circumstancesGeneral Machine preparationInterrupting operation StartingMowing slopes Fuel BladesTransportation and Storage Safety Battery WarningLabels Labels Labels Labels Labels At operators right side Below seat Volt Power OutletControls Choke CFuel Selector Valve U Turns during forward movement Lift and traction levers operators right sideTurns during reverse movement Parking brake in on position Operators left side Pushing the machinePRE-OPERATION Check List OPERATOR’S Responsibility PRE-OPERATION Check ListStarting the Engine OperationFueling Operator PresenceDriving Operating NotesCutting Tips CuttingMaintenance Chart Repair Protection Agreements Maintenance RecordHeres what the Repair Protection Agreement* includes Battery MaintenanceCheck Daily Lubrication Spark Plugs Engine OILFuel Filter Dual Element AIR CleanerSpecific Torques Engine CoolingPurging Transaxles Transaxle Fluid Change TransaxlesBlade Balance Blade installationBlade Removal SharpeningHeight of cut AdjustmentsHeight of cut ranges for roller adjustment Deck LevelingParking Brake Neutral HydrostatIC Transaxle adjust- mentSBelt Tension Belt ReplacementCutterdeck belt Hydro Transaxle Drive beltMY-HOME1-800-469-4663 Get it fixed, at your home or ours

127.28875 specifications

The Craftsman 127.28875 is a versatile and reliable tool that stands out in the world of power tools and home improvement equipment. Designed with the DIY enthusiast and professional contractor in mind, this tool combines functionality, durability, and advanced technology to meet various project needs.

One of the primary features of the Craftsman 127.28875 is its powerful motor. Equipped with high-performance capabilities, it efficiently tackles both light-duty and heavy-duty tasks, allowing users to complete their projects with ease and confidence. Whether drilling through wood, metal, or plastic, the motor ensures consistent performance, minimizing downtime and maximizing productivity.

The tool's ergonomic design is another significant highlight. It features a comfortable grip and well-balanced body, reducing user fatigue during extended work sessions. The lightweight construction contributes to its maneuverability, making it an ideal choice for overhead tasks or tight spaces. Additionally, the placement of controls is user-friendly, facilitating effortless adjustments while maintaining focus on the job at hand.

Technologically, the Craftsman 127.28875 includes advanced features like variable speed settings. This allows users to adapt the speed based on the specific material and application, providing greater precision and control. The integrated LED work light also enhances visibility, ensuring that users can see their work clearly, regardless of the lighting conditions.

Another noteworthy characteristic is the tool's compatibility with various attachments and accessories. This versatility enables users to customize their setup according to the demands of their projects, which can range from drilling and screwing to sanding and polishing. The quick-change chuck system further accelerates the swapping of bits, streamlining workflows.

Durability is a hallmark of any Craftsman product, and the 127.28875 is no exception. Built with robust materials that withstand the rigors of daily use, this tool is designed to endure tough job sites. The incorporated safety features, such as overload protection, also enhance its longevity, giving users peace of mind during operation.

In summary, the Craftsman 127.28875 is a powerful and versatile tool that is ideal for both casual DIYers and seasoned professionals. With its robust motor, ergonomic design, advanced technology, and compatibility with various accessories, it offers a comprehensive solution for a wide range of applications. Investing in this tool means investing in efficiency, durability, and enhanced performance for all your project needs.
Top Page Image Contents