Orion 3002 manual Directed Electronics, Inc

Page 15

Step 6 Turn up the level control corresponding to the tweeter output until you hear slight distortion and turn back the level control slightly for an undistorted output. Depending on your system the midrange and tweeter output may be on the same output channels.

Step 7 Fine-tune the output level between midrange and tweeters. Refer to the Internal Crossover Configuration section of this manual for detailed instruc- tions.

Step 8 Repeat Steps 5-7 for the rear speakers. If you do not have rear speakers con- tinue to Step 10.

Step 9 Set levels between the front and rear midrange and tweeters for optimum front/rear balance.

Step 10 Turn up the level control corresponding to the woofer output until you hear slight distortion and turn back the level control slightly for an undistorted output.

Step 11 Fine-tune the output level between satellite speakers and the woofers. Refer to the Internal Crossover Configuration section of this manual for detailed instructions. If using an RGC-1, adjust the level to the output of the woofer to match the sonic requirements of the system.

Step 12 Enjoy your awesome Orion sound system.

14

©2004 Directed Electronics, Inc.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Contents Introduction Practice Safe SoundWhat’s in the Box Record Your Serial Number and Date Limited TWO-YEAR Consumer WarrantyAmplifier Section Orion SpecificationsAmplifier Controls and Connections Low-Pass Crossover Amplifier SettingsStereo / Mono Input Configuration Internal Crossover ConfigurationHigh-Pass Crossover Input GainINTELLi Bass Control Amplifier Wiring Power ConnectionsSpeaker Connections Summed Bridged Configuration Trunk Compartment Amplifier InstallationChoosing Mounting Locations Passenger CompartmentTools of the Trade General Precautions and Installation TipsStep By Step Installation SET UP and Troubleshooting Testing the SystemAdjusting the Sound of the System Directed Electronics, Inc Symptom Probable Cause Action To Take Troubleshooting TipsInternal Crossover Configuration Directed Electronics, Inc Warranty

3002 specifications

The Orion 3002 is a highly advanced spacecraft designed for deep-space exploration, research, and potential colonization missions. Boasting cutting-edge technologies and innovative engineering, the Orion 3002 is a hallmark of modern aerospace design, focusing on efficiency, reliability, and adaptability.

One of the primary features of the Orion 3002 is its powerful propulsion system, which employs a hybrid of traditional chemical propulsion and advanced ion thrusters. This combination allows for swift maneuverability within the Earth's atmosphere and efficient long-duration travel in the vacuum of space. The ion thrusters utilize electric fields to accelerate ions, providing a thrust that is highly efficient and capable of extending travel durations.

The spacecraft is constructed using lightweight, durable materials that significantly enhance its structural integrity without impeding performance. The exterior is designed to withstand the harsh conditions of space, including fluctuations in temperature, radiation exposure, and micrometeorite impacts. Additionally, the Orion 3002 is equipped with advanced thermal protection systems that maintain optimal operating conditions for onboard systems and crew.

The Orion 3002 features a cutting-edge avionics suite that integrates artificial intelligence and machine learning algorithms. These systems are capable of real-time data analysis, enabling the spacecraft to make autonomous decisions regarding navigation, course adjustments, and systems monitoring. This level of intelligence not only enhances safety but also allows for more complex mission profiles, including those requiring minimal human oversight.

In terms of crew accommodations, the Orion 3002 prioritizes comfort and functionality. The living quarters are designed to support long-duration missions with ergonomic sleeping arrangements, a fully equipped galley, and dedicated research labs that allow astronauts to conduct a variety of experiments during their travels. Advanced life support systems recycle air and water, ensuring sustainability throughout the mission.

The Orion 3002 also incorporates advanced communication systems that enable seamless, high-bandwidth data transmission over vast distances. This technology employs a series of relay satellites and deep-space communication networks, ensuring that the crew remains connected with mission control and can share their findings efficiently.

In conclusion, the Orion 3002 stands as a testament to human ingenuity and the quest for knowledge beyond our planet. With its blend of advanced technologies, durable construction, and crew-centric design, it is well-equipped to tackle the challenges of deep-space missions, paving the way for future exploratory endeavors that expand our understanding of the universe.
Top Page Image Contents