Weed Eater 532 43 32-03, WE261, 96024000100, 96022000700 manual Belt, Engine

Page 18

BLADE REMOVAL

1.Raise mower to highest position to allow access to blade.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new blade with stamped "THIS SIDE UP" facing deck and mandrel assembly.

 

 

Mandrel

 

 

Assembly

 

Blade

 

Blade Bolt

 

 

(Special)

025

4

 

 

5

 

 

Star

 

Center Hole

 

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Install and tighten blade bolt securely (45-55 Ft. Lbs.).

IMPORTANT: Special blade bolt is heat treated.

BATTERY

Your riding mower has a battery charging system which is sufficient for normal use.

•Keep battery and connectors clean.

•Only recharge battery with charger approved for a 12V 2.8 amp. hour battery.

•Charging with any other charger or an automotive style charger can cause per- manent damage to the battery.

•Charge battery for 24 hours for a full charge.

NOTE: The original equipment battery on your riding mower is maintenance free. Do not attempt to open or remove caps or cov- ers. Adding or checking level of electrolyte is not necessary.

WARNING: Do not jump start battery. Permanent damage to the battery or personal injury may occur.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

V-BELT

Check V-belt for deterioration and wear after 100 hours of operation and replace if neces- sary. The belt is not adjustable. Replace belt if it begins to slip from wear.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart1_e

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, the oils will result in increased oil consumption

when used above 32°F. Check your engine

oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation or at least once a year if the riding mower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL.

•Be sure riding mower is on level sur- face.

•Oil will drain more freely when warm.

•Oil can be pumped from the engine with a mechanical or electric siphon pump.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Insert end of pump into oil reservoir.

3.Pump oil from reservoir.

Oil Cap

Oil Fill

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents WE261 Table of Contents WarrantySafety Rules Always wear eye protection when operat- ing machineGeneral Operation IV. Service Safe Handling of Gasoline II. Slope OperationIII. Children General Service Never operate machine in a closed areaUnassembled Parts Product SpecificationsRead and observe the safety rules Customer ResponsibilitiesHOW to SET UP Your Riding Mower Install Steering Column ASSEMBLY/PRE-OPERATIONTools Required for Assembly To Remove Riding Mower from CartonCheck Deck Levelness Check BatteryCheck Tire Pressure Check for Proper Positon of Mower Drive BeltCHECKLIST Operation Know Your Riding Mower ROSTo SET Parking Brake HOW to USE Your Riding MowerTo Adjust Mower Cutting Height StoppingTo Stop Mower Blade Using the Reverse Operation SystemTo Operate Mower Disengage deck clutch leverBefore Starting the Engine To Start EngineMowing Tips Recoil Starting SystemMaintenance General RecommendationsBefore Each USE Tires Riding MowerBrake Operation Axle and SpindlesBelt EngineAIR Filter Riding Mower Service and AdjustmentsTo Install Mower To Remove MowerFRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment To Replace Mower Blade Drive BeltTo Start Engine with a Weak Battery To Adjust BrakeTo Adjust Steering Wheel Alignment Replacing BatteryEngine Interlocks and RelaysTo Replace Fuse Mower BatteryStorage OtherTroubleshooting Chart Problem Cause CorrectionEngine continues to Schematic Riding Mower -CATALOG NO. WE261Electrical KEY Part Description Chassis PAN, Seat Drive Service KIT, Transaxle Steering Wheel ASM Front Mower Deck Mandrel ASM Decals Suggested Guide for Sighting Slopes for Safe Operation Parts and Service
Related manuals
Manual 26 pages 24.19 Kb Manual 20 pages 13.36 Kb

96024000100, 532 43 32-03, 96022000700, WE261 specifications

The Weed Eater WE261 is a robust and versatile string trimmer designed to tackle a variety of lawn care tasks with ease and efficiency. Aimed at both homeowners and landscaping professionals, the WE261 is built to handle the challenges of overgrown lawns and garden beds, providing powerful performance and reliability.

One of the standout features of the WE261 is its 26cc 2-cycle engine, which delivers ample power while maintaining a lightweight profile. This engine ensures that users can navigate through dense vegetation and thick weeds without compromising performance. The 2-cycle technology allows for efficient fuel usage, providing users with longer run times between refuels.

The WE261 is equipped with a dual line bump head, which automatically releases more line as needed. This feature enhances productivity by allowing the user to focus on trimming rather than manually adjusting the string. The .095-inch line diameter provides a thick cutting path, making it effective against stubborn weeds and tall grass.

Another significant characteristic of the WE261 is its ergonomic design. The trimmer features a padded hand grip and an adjustable handle, allowing users to customize their grip for maximum comfort and control. This is especially beneficial during extended use, as it minimizes fatigue and enhances maneuverability.

The trimmer also incorporates an easy-start technology, which simplifies the starting process. Users can enjoy quick and hassle-free starts with minimal effort required. This feature is particularly useful for those who may not have extensive experience with starting gas-powered equipment.

Durability is a key consideration in the design of the WE261. Constructed with high-quality materials, this weed eater is built to withstand the rigors of regular use. The robust build ensures that it can handle various outdoor conditions, making it a reliable option for any lawn care enthusiast.

In summary, the Weed Eater WE261 presents a combination of power, efficiency, and user-friendly features. With its strong 26cc engine, automatic dual line bump head, ergonomic design, and easy-start technology, it stands out as an exceptional choice for anyone looking to maintain a well-groomed lawn. Whether dealing with overgrown areas or simply keeping the yard tidy, the WE261 is up to the task, delivering performance that users can trust.
Top Page Image Contents