Weed Eater WE261 manual Service and Adjustments, Riding Mower, To Remove Mower, To Install Mower

Page 20

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place deck clutch in “DISENGAGED” position.

4.Turn ignition key to “STOP” and remove key.

5.Make sure the blade and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

RIDING MOWER

TO REMOVE MOWER

1.Place deck clutch in “DISENGAGED" position.

2.Move mower height adjustment lift lever forward to lower mower to its lowest position.

3.Remove mandrel cover.

4.Remove pins holding left and right front mower suspension arms in place.

5.Remove bolt holding deck front to rear leveling rod in place.

6.Remove pin holding deck lift link arm in place.

7.Remove bolt holding deck side to side leveling rod in place.

8.Remove belt from around pulleys.

9.Slide deck out from under side of mower.

TO INSTALL MOWER

Install in reverse order following instructions in "TO REMOVE MOWER" section.

Deck Leveling

Side to Side

Rod Bolt

Mandrel Cover

Front Leveling Rod Bolt

Mower

Suspension

Arm Pin

Deck Lift Link Pin

20

Image 20
Contents WE261 Table of Contents WarrantyGeneral Operation Safety RulesAlways wear eye protection when operat- ing machine III. Children IV. Service Safe Handling of GasolineII. Slope Operation General Service Never operate machine in a closed areaProduct Specifications Read and observe the safety rulesUnassembled Parts Customer ResponsibilitiesASSEMBLY/PRE-OPERATION Tools Required for AssemblyHOW to SET UP Your Riding Mower Install Steering Column To Remove Riding Mower from CartonCheck Battery Check Tire PressureCheck Deck Levelness Check for Proper Positon of Mower Drive BeltCHECKLIST Operation Know Your Riding Mower ROSHOW to USE Your Riding Mower To Adjust Mower Cutting HeightTo SET Parking Brake StoppingUsing the Reverse Operation System To Operate MowerTo Stop Mower Blade Disengage deck clutch leverBefore Starting the Engine To Start EngineMowing Tips Recoil Starting SystemBefore Each USE MaintenanceGeneral Recommendations Riding Mower Brake OperationTires Axle and SpindlesBelt EngineAIR Filter Service and Adjustments To Install MowerRiding Mower To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Replace Mower Blade Drive BeltTo Adjust Brake To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery Replacing BatteryTo Replace Fuse EngineInterlocks and Relays Battery StorageMower OtherTroubleshooting Chart Problem Cause CorrectionEngine continues to Schematic Riding Mower -CATALOG NO. WE261Electrical KEY Part Description Chassis PAN, Seat Drive Service KIT, Transaxle Steering Wheel ASM Front Mower Deck Mandrel ASM Decals Suggested Guide for Sighting Slopes for Safe Operation Parts and Service
Related manuals
Manual 26 pages 24.19 Kb Manual 20 pages 13.36 Kb

96024000100, 532 43 32-03, 96022000700, WE261 specifications

The Weed Eater WE261 is a robust and versatile string trimmer designed to tackle a variety of lawn care tasks with ease and efficiency. Aimed at both homeowners and landscaping professionals, the WE261 is built to handle the challenges of overgrown lawns and garden beds, providing powerful performance and reliability.

One of the standout features of the WE261 is its 26cc 2-cycle engine, which delivers ample power while maintaining a lightweight profile. This engine ensures that users can navigate through dense vegetation and thick weeds without compromising performance. The 2-cycle technology allows for efficient fuel usage, providing users with longer run times between refuels.

The WE261 is equipped with a dual line bump head, which automatically releases more line as needed. This feature enhances productivity by allowing the user to focus on trimming rather than manually adjusting the string. The .095-inch line diameter provides a thick cutting path, making it effective against stubborn weeds and tall grass.

Another significant characteristic of the WE261 is its ergonomic design. The trimmer features a padded hand grip and an adjustable handle, allowing users to customize their grip for maximum comfort and control. This is especially beneficial during extended use, as it minimizes fatigue and enhances maneuverability.

The trimmer also incorporates an easy-start technology, which simplifies the starting process. Users can enjoy quick and hassle-free starts with minimal effort required. This feature is particularly useful for those who may not have extensive experience with starting gas-powered equipment.

Durability is a key consideration in the design of the WE261. Constructed with high-quality materials, this weed eater is built to withstand the rigors of regular use. The robust build ensures that it can handle various outdoor conditions, making it a reliable option for any lawn care enthusiast.

In summary, the Weed Eater WE261 presents a combination of power, efficiency, and user-friendly features. With its strong 26cc engine, automatic dual line bump head, ergonomic design, and easy-start technology, it stands out as an exceptional choice for anyone looking to maintain a well-groomed lawn. Whether dealing with overgrown areas or simply keeping the yard tidy, the WE261 is up to the task, delivering performance that users can trust.