Throttle Lever, Primer Bulb, Choke Lever

THROTTLE LEVER

The throttle lever is used to select the desired engine speed and to stop the engine. To stop engine, move the throttle lever to the STOP position.

PRIMER BULB

The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer

pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

CHOKE LEVER

The CHOKE helps to supply fuel to the engine to aid in cold starting. The CHOKE OFF posi- tion is used for full speed operation. The 1/2 position is used for a brief initial warm-up peri- od and to set the engine at idle speed.

OPERATING POSITION

Eye

Protection

OPERATING TIPS

S To reduce the risk of hearing loss associated with sound level(s), hearing protection is required.

SOperate power equipment only at reasonable hours--not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances. Usual recom- mendations are 9:00 a.m. to 5:00 p.m.,

Monday though Saturday.

S To reduce noise levels, operate power blowers at the lowest possible throttle speed to do the job.

STo reduce noise levels, limit the number of pieces of equipment used at any one time.

SUse rakes and brooms to loosen debris be-

fore blowing.

S In dusty conditions, slightly dampen sur- faces when water is available.

S Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

SWatch out for children, pets, open windows, or freshly washed cars. Blow debris away

safely.

SUse the full blower tube extension so the air stream can work close to the ground.

SAfter using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you begin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on un- leaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gaso- line and oil at a ratio of 40:1. A 40:1 ratio is ob- tained by mixing 3.2 fluid ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or boat oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momen- tarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

CAUTION: Never use straight gasoline in your unit. This will cause permanent engine damage and void the limited warranty.

FUEL REQUIREMENTS

This engine requires the use of minimum 87 octane [R+M]/2 clean gasoline.

IMPORTANT

Use of alcohol blended fuels (called gasohol or using ethanol or methanol) can cause major en- gine performance and durability problems.

WARNING: Alternative fuels (not gasoline) such as E--15 (15% alcohol), E--20 (20% alcohol), E--85 (85% alcohol) are NOT classified as gasoline and are NOT approved for use in 2--stroke gasoline engines. Use of alternative fuels will cause problems such as: improper clutch engagements, overheating, vapor lock, power loss, lubrication deficiency, deterioration of fuel lines, gaskets and internal carburetor components, etc. Alternative fuels cause high moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

TO STOP THE ENGINE

DTo stop the engine, move the throttle lever to the STOP position.

STARTING YOUR ENGINE

WARNING: You MUST make sure the tube is secure before using the unit.

DFuel engine. Move at least 10 feet (3 me-

ters) away from the fueling site.

D Hold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

-- 5 --

545186783 specifications

The Weed Eater 545186783 is a cutting-edge string trimmer designed for homeowners and landscaping enthusiasts who seek efficiency and convenience in their lawn care routines. This versatile tool stands out due to its powerful performance and user-friendly features, making it an essential addition to any gardening toolkit.

One of the key features of the Weed Eater 545186783 is its robust 25cc engine, which delivers ample power for tackling tough overgrowths and maintaining a pristine lawn. The engine is designed for easy starting, thanks to its simplified pull-start mechanism that reduces the effort required to get the trimmer up and running. This ensures that users spend less time preparing their equipment and more time enjoying their outdoor spaces.

The ergonomics of the Weed Eater 545186783 are noteworthy, as it includes an adjustable handle that can be customized for optimum comfort. Its lightweight design allows for prolonged use without causing fatigue, which is particularly beneficial for larger lawn care tasks. The trimmer is equipped with a dual-line bump head that automatically feeds new line as needed, minimizing interruptions during operation and enhancing productivity.

This model also incorporates advanced technology in its design, such as the "Easy Start" system that further simplifies ignition. Users can experience a more hassle-free starting process, making it more approachable for those new to using string trimmers. This system leads to a quicker, smoother experience, allowing trimmers to get to work with minimal frustration.

Durability is another hallmark of the Weed Eater 545186783, as it is built with high-quality materials intended to withstand the rigors of landscaping tasks. The robust construction ensures longevity, even when used on challenging terrains or tough vegetation.

Additionally, safety features like the protective guard enhance user security by preventing debris from being thrown during operation. When combined with a low vibration design, these elements contribute to a safer and more controlled user experience.

In summary, the Weed Eater 545186783 serves as an excellent tool for anyone looking to simplify their lawn care process. With a powerful engine, ergonomic design, innovative starting technology, and safety features, this string trimmer promotes ease of use and reliability, making it a top choice for effective gardening and landscaping.