Weed Eater 545186783 instruction manual Storage

Page 7

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SThrottle Lever -- Ensure throttle lever func- tions properly by moving the throttle lever to

the STOP position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

Air Filter

Screw

Air Filter Cover

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep debris from falling into the carbure- tor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this product contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by your authorized service dealer.

CARBURETOR ADJUSTMENTS

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your engine will not run properly or you require further assistance, contact an authorized service dealer or call

1--

800--

554--

6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit

before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

-- 7 --

Image 7
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Safety Rules Blower Tube AssemblyAssembly OperationOperating Position Throttle LeverPrimer Bulb Choke LeverGeneral Recommendations MaintenanceStarting Position Starting a Warm EngineStorage Engine Troubleshooting Table Cause RemedyOther Canada, contact Limited WarrantyConsequential Damages Weed EAT

545186783 specifications

The Weed Eater 545186783 is a cutting-edge string trimmer designed for homeowners and landscaping enthusiasts who seek efficiency and convenience in their lawn care routines. This versatile tool stands out due to its powerful performance and user-friendly features, making it an essential addition to any gardening toolkit.

One of the key features of the Weed Eater 545186783 is its robust 25cc engine, which delivers ample power for tackling tough overgrowths and maintaining a pristine lawn. The engine is designed for easy starting, thanks to its simplified pull-start mechanism that reduces the effort required to get the trimmer up and running. This ensures that users spend less time preparing their equipment and more time enjoying their outdoor spaces.

The ergonomics of the Weed Eater 545186783 are noteworthy, as it includes an adjustable handle that can be customized for optimum comfort. Its lightweight design allows for prolonged use without causing fatigue, which is particularly beneficial for larger lawn care tasks. The trimmer is equipped with a dual-line bump head that automatically feeds new line as needed, minimizing interruptions during operation and enhancing productivity.

This model also incorporates advanced technology in its design, such as the "Easy Start" system that further simplifies ignition. Users can experience a more hassle-free starting process, making it more approachable for those new to using string trimmers. This system leads to a quicker, smoother experience, allowing trimmers to get to work with minimal frustration.

Durability is another hallmark of the Weed Eater 545186783, as it is built with high-quality materials intended to withstand the rigors of landscaping tasks. The robust construction ensures longevity, even when used on challenging terrains or tough vegetation.

Additionally, safety features like the protective guard enhance user security by preventing debris from being thrown during operation. When combined with a low vibration design, these elements contribute to a safer and more controlled user experience.

In summary, the Weed Eater 545186783 serves as an excellent tool for anyone looking to simplify their lawn care process. With a powerful engine, ergonomic design, innovative starting technology, and safety features, this string trimmer promotes ease of use and reliability, making it a top choice for effective gardening and landscaping.