Weed Eater 171883 manual Engine, Battery, Belts, Transaxle Cooling, Lubrication

Page 16

CUSTOMER RESPONSIBILITIES

BATTERY

Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•Open battery box door.

•Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

•Rinse the battery with plain water and dry.

•Clean terminals and battery cable ends with wire brush until bright.

•Coat terminals with grease or petroleum jelly.

•Reinstall battery (See “REPLACING BATTERY” in the Service and Adjustments section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF, SG, or SH. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

°F

-20°

0°

 

 

30° 32°

40°

 

60°

80°

 

100°

°C

-30°

-20°

-10°

0°

10°

20°

30°

40°

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

FIG. 10

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/ dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 10 and 11)

Determine temperature range expected before oil change. All oil must meet API service classification SF, SG or SH.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove drain plug.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

OIL FILL

CAP/DIPSTICK

OIL DRAIN PLUG

FIG. 11

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model NO. WE12538G Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents Product Specifications Customer ResponsibilitiesUnassembled Parts Steering Wheel SeatKeys Slope SheetAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To USE Throttle Control see FIGBefore Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsMowing Tips To Start Engine See Fig¿ Lubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen See Fig To Service PRE-CLEANERTo Service Cartridge Engine Cooling Fins See FigCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERReplacing Battery See To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust Carburetor See FigPreliminary Setting Final SettingStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number WE12538GElectrical KEY Part NO. NO.DESCRIPTION Chassis KEY Part Description Drive Transaxle Steering KEY Engine 140310 Control Th/ch Flag Seat Decals Wheels & TiresLSB42 LBD48Mower Lift 159460 Wire Asm Inner/Sprg w/plunger Mower Deck Repair Parts Service Notes Limited Warranty Service Suggested Guide for Sighting Slopes for Safe Operation Sighting Guide

171883 specifications

The Weed Eater 171883 is a premier choice for homeowners and gardening enthusiasts seeking an efficient, reliable, and user-friendly string trimmer. This model is specifically designed to simplify yard maintenance, making it an essential tool for tackling overgrown grasses, weeds, and even light brush.

One of the standout features of the Weed Eater 171883 is its lightweight design. Weighing in at a manageable level, this trimmer is easy to handle, allowing users to maneuver effortlessly around garden beds, fences, and other obstacles. The balanced weight distribution means less fatigue during extended use, making it a practical option for larger yards.

The 171883 model incorporates a powerful motor that delivers high performance, ensuring effective cutting power. With its notable RPM (revolutions per minute), users can expect fast and efficient trimming, significantly reducing the time spent on yard work. This makes it an ideal solution for busy homeowners who require a quick yet effective gardening tool.

Another key feature is the innovative line feed technology. This model utilizes a bump feed system, which allows the user to release more cutting line simply by tapping the trimmer head on the ground. This easy-to-use mechanism ensures that you always have the optimal length of line for the job without the need for manual adjustments, allowing for a more efficient workflow.

The Weed Eater 171883 also boasts adjustable handle positions, providing customizable comfort and control. Users can easily modify the height of the handle for a more ergonomic grip, reducing strain on the wrists and back during prolonged use.

Finally, the trimmer is equipped with a durable and robust cutting head that can withstand the rigors of outdoor use. Its reinforced construction means it can handle tough vegetation with ease while offering quick and straightforward line changes.

In summary, the Weed Eater 171883 combines lightweight design, powerful performance, user-friendly features, and durability. It is an essential tool for anyone looking to maintain their yard efficiently and effectively, making outdoor chores less of a burden and more of an enjoyable experience. With this trimmer, keeping your lawn looking pristine has never been easier.
Top Page Image Contents