Weed Eater 176840 owner manual Engine, Battery, Belts, Transaxle Cooling, Lubrication

Page 16

CUSTOMER RESPONSIBILITIES

BATTERY

Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•Open battery box door.

•Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

•Rinse the battery with plain water and dry.

•Clean terminals and battery cable ends with wire brush until bright.

•Coat terminals with grease or petroleum jelly.

•Reinstall battery (See “REPLACING BATTERY” in the Service and Adjustments section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

°F

-20°

0°

 

 

30° 32° 40°

 

 

60°

80°

 

100°

°C

-30°

-20°

-10°

0°

10°

20°

30°

40°

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

FIG. 10

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/ dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 10 and 11)

Determine temperature range expected before oil change. All oil must meet API service classification SF, SG or SH.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove cap from bottom fitting of drain valve and install the drain tube onto the fitting.

•Unlock drain valve by pushing inward and turning coun- terclockwise.

•To open, pull out on the drain valve.

•After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

•Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

 

OIL DRAIN VALVE

CLOSED

 

AND

 

LOCKED

 

POSITION

 

 

DRAIN

CAP

TUBE

 

FIG. 11

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model NO. WE12538H Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents Product Specifications Customer ResponsibilitiesSteering Wheel Seat Unassembled PartsKeys Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To USE Throttle Control see FIGBefore Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsMowing Tips To Start Engine See Fig¿ Lubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen To Service PRE-CLEANERTo Service Cartridge Engine Cooling Fins See FigCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERReplacing Battery See Figs To Replace Headlight BulbInterlocks and Relays To Replace FuseTo Remove Hood and Grill Assembly See Fig To Adjust CarburetorTo Adjust Throttle Control Cable See Fig EngineStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number WE12538HElectrical 2122175566 175158175141 Chassis KEY Part Description Drive 112 113 170 116 202 150 151 145 2675174973 173898Steering 140044X428 154427 Axle AsmOptional Equipment 148315 170551 Control Th/ch Flag71070512 Seat 174894Decals Wheels & Tires176840 176841Mower Lift 159460 Wire Asm Inner/Sprg w/plunger Mower Deck Repair Parts Service Notes Limited Warranty Securing Warranty Service No Dealer WarrantyProducts Warranted Products And Items Not WarrantedOnly Ride UP and Down Hill SightingNot Across Hill Guide

176840 specifications

The Weed Eater 176840 is an exceptional landscaping tool designed to make yard maintenance efficient and effortless. This impressive model stands out in the market for its user-friendly features, advanced technologies, and robust performance, making it a top choice for both homeowners and professional landscapers.

One of the most notable features of the Weed Eater 176840 is its lightweight design. Weighing in at just a few pounds, this trimmer allows users to maneuver it easily around their gardens, avoiding the fatigue often associated with heavier models. The ergonomic handle contributes to ease of use, making it comfortable for extended periods of operation.

The Weed Eater 176840 is equipped with a powerful 2-cycle engine, delivering high speed and performance for tackling various types of vegetation. This engine ensures efficient cutting power, allowing users to trim grass and weeds with precision. The air-filter technology incorporated into the engine enhances performance, enabling optimal air flow while reducing emissions, thus making it environmentally friendly.

Another standout feature is the innovative bump head design, which simplifies line advancement. Users can quickly release more cutting line by tapping the head on the ground, eliminating the need to stop and manually feed the trimmer line. This feature greatly enhances productivity, allowing users to stay focused on their landscaping tasks.

The 176840 model also offers adjustable cutting widths, which provides versatility for different trimming needs. Users can switch between wider and narrower cutting paths according to the requirements of their yard, whether it be edging sidewalks or tackling overgrown areas.

Moreover, the Weed Eater 176840 is designed with durability in mind. Constructed from high-quality materials, it can withstand the rigors of outdoor use while resisting wear and tear. This reliability ensures that users can depend on their trimmer season after season.

Additionally, easy maintenance features, such as accessible air filters and spark plugs, allow for straightforward upkeep, enhancing the longevity of the trimmer. The model is also compatible with various accessories, enabling users to transform their trimmer into a multi-functional tool.

In summary, the Weed Eater 176840 is a strong contender in the world of garden equipment, offering a combination of powerful performance, innovative technologies, and user-friendly characteristics. Whether for residential use or professional landscaping, this trimmer provides everything needed for effective yard management. It represents the ideal solution for maintaining a beautiful and well-groomed outdoor space.
Top Page Image Contents