Reverse Operation System ROS, To Transport

OPERATION

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

•Depress clutch/brake pedal all the way down and hold.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before and while backing.

•Move gear shift lever to reverse (R) position and slowly release clutch/brake pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION	ENGINE "ON" POSITION
	(NORMAL OPERATING)

02828

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

Fig. 6

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push clutch/brake pedalquicklytobrakepositionandengageparkingbrake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

435073, 960180001, 96018000100 specifications

The Weed Eater 96018000100 is a versatile and powerful trimmer designed for homeowners and professionals alike. Known for its efficiency and reliability, this model is a part of Weed Eater's commitment to provide quality outdoor power tools that make yard work easier.

One of the key features of the Weed Eater 96018000100 is its lightweight design, which allows for easy maneuvering and reduces user fatigue during extended use. Weighing in at just over 10 pounds, it offers a balance that is perfect for trimming around flower beds, sidewalks, and hard-to-reach areas. The ergonomic handle design further enhances user comfort, making it suitable for users of varying heights.

Power is critical when it comes to outdoor tools, and the 96018000100 does not disappoint. This model is equipped with a robust 25cc two-cycle engine, providing more than enough power to tackle thick weeds and overgrown foliage. The engine operates efficiently, offering reliable performance while simultaneously ensuring low emissions. This eco-friendly approach aligns with current environmental standards, making it suitable for eco-conscious consumers.

Another standout feature of the Weed Eater 96018000100 is its easy-to-load spool system. The Rapid Reload system allows users to quickly and efficiently load new line without the hassle of disassembling the trimmer head. This innovative design significantly minimizes downtime and enhances productivity, making it a favorite among both seasoned gardeners and weekend warriors.

In terms of cutting capabilities, the 96018000100 boasts a 17-inch cutting width, allowing it to cover more ground with each pass while still delivering precise cuts around edges and hard surfaces. Additionally, the trimmer features an adjustable head, giving users the ability to tilt and reach hard-to-access spots with ease.

Safety is another crucial aspect of the Weed Eater's ethos. The model includes safety features such as a protective guard that minimizes the risk of debris being thrown towards the user while operational. A safety switch also prevents accidental starts, ensuring that this powerful tool is safe for all users.

In conclusion, the Weed Eater 96018000100 merges innovative technology with powerful performance, making it an essential tool for anyone looking to maintain their outdoor space effectively. With its lightweight design, powerful engine, and user-friendly features, it stands out in its category as a reliable and efficient choice for lawn care enthusiasts.