Weed Eater 96018000100, 435073 manual Install Seat See Fig, To Check Battery See Fig

Page 7

ASSEMBLY

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SHOULDER

BOLT

 

SEAT PAN

 

FLAT WASHER

 

LOCK WASHER

 

 

02465

ADJUSTMENT

 

BOLT

 

Fig. 2

TO CHECK BATTERY (See Fig. 3)

•Lift seat to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

•For battery and battery cable installation see "RE- PLACING BATTERY" in the "Service and Adjustments" section in this manual.

SEAT

LABEL

02602

Fig. 3

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Releaseparkingbrakebydepressingclutch/brakepedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding the deflector shield up against tractor.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model 960180001II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Keys Slope Sheet Unassembled PartsSteering Wheel SeatBefore Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonTo Check Battery See Fig Install Seat See FigCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport Reverse Operation System ROSTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Lubrication Chart MaintenanceBlade Removal See Fig BatteryTractor Blade CareEngine Engine Cooling System See CleaningIN-LINE Fuel Filter See Fig To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingTo Check Brake Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Weak or Dead Fully Charged BatteryTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsExcessive Limited Warranty Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service

435073, 960180001, 96018000100 specifications

The Weed Eater 96018000100 is a versatile and powerful trimmer designed for homeowners and professionals alike. Known for its efficiency and reliability, this model is a part of Weed Eater's commitment to provide quality outdoor power tools that make yard work easier.

One of the key features of the Weed Eater 96018000100 is its lightweight design, which allows for easy maneuvering and reduces user fatigue during extended use. Weighing in at just over 10 pounds, it offers a balance that is perfect for trimming around flower beds, sidewalks, and hard-to-reach areas. The ergonomic handle design further enhances user comfort, making it suitable for users of varying heights.

Power is critical when it comes to outdoor tools, and the 96018000100 does not disappoint. This model is equipped with a robust 25cc two-cycle engine, providing more than enough power to tackle thick weeds and overgrown foliage. The engine operates efficiently, offering reliable performance while simultaneously ensuring low emissions. This eco-friendly approach aligns with current environmental standards, making it suitable for eco-conscious consumers.

Another standout feature of the Weed Eater 96018000100 is its easy-to-load spool system. The Rapid Reload system allows users to quickly and efficiently load new line without the hassle of disassembling the trimmer head. This innovative design significantly minimizes downtime and enhances productivity, making it a favorite among both seasoned gardeners and weekend warriors.

In terms of cutting capabilities, the 96018000100 boasts a 17-inch cutting width, allowing it to cover more ground with each pass while still delivering precise cuts around edges and hard surfaces. Additionally, the trimmer features an adjustable head, giving users the ability to tilt and reach hard-to-access spots with ease.

Safety is another crucial aspect of the Weed Eater's ethos. The model includes safety features such as a protective guard that minimizes the risk of debris being thrown towards the user while operational. A safety switch also prevents accidental starts, ensuring that this powerful tool is safe for all users.

In conclusion, the Weed Eater 96018000100 merges innovative technology with powerful performance, making it an essential tool for anyone looking to maintain their outdoor space effectively. With its lightweight design, powerful engine, and user-friendly features, it stands out in its category as a reliable and efficient choice for lawn care enthusiasts.
Top Page Image Contents