Weed Eater 530086935 Line Replacement, Refilling the Spool with Line, Installing Spool with Line

Page 8

LINE REPLACEMENT

Pre--wound spools offer the most convenient method for replacing line and ensuring opti- mum performance.

S Replacement spools are color--coded to en- sure use of the correct spool with your unit. Be sure to use the same color spool as the existing spool.

NOTE: Always clear dirt and debris from cutting head components when performing any type of maintenance.

SHold spool and unscrew cap by turning in the direction shown on top of the cap.

S Remove line guide ring and spool.

NOTE: When removing and/or installing spool, ensure dust cup remains installed over shaft.

Use a pre--wound spool or refill spool with line. If using a pre--wound spool, remove tape strip from line and spool.

REFILLING THE SPOOL WITH LINE

WARNING: Use only 0.080” (2 mm)

diameter round line. Other sizes and shapes of line will not advance properly and will result in improper cutting head function or can cause se- rious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

1.Cut a length of 30 feet of 0.080” (2 mm) di- ameter round Weed Eater∀ brand line.

2.Insert one end of line into center cavity of empty spool. Ensure line will feed into spool in the direction shown on the spool (counterclockwise).

3.Continue feeding line into spool, leaving 4 -- 6 inches (10 -- 15 cm) unwound from center of spool.

INSTALLING SPOOL WITH LINE

1.Install replacement spool.

2.Thread line through line guide ring.

Line through guide ring

Slot

Replacement Spool

3.Rest guide ring on spool and place line through slot. Allow line to extend 4 -- 6 inch- es (10 -- 15 cm) from center of spool.

4.Ensure line remains in slot while screwing cap on to the shaft. Only tighten cap hand tight!

CARBURETOR ADJUSTMENT

Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

Feed line in direction shown on spool.

Spool

WARNING:

S

Store unit and fuel in a well ventilated area

Perform the following

where fuel vapors cannot reach sparks or

steps after each use:

 

open flames from water heaters, electric

S Allow engine to cool, and secure the unit

motors or switches, furnaces, etc.

before storing or transporting.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions Fuel Safety Operator SafetyUnit / Maintenance Safety Cutting Safety Transporting and StorageAttaching Shield OperatorON/STOP Switch Choke Know Your TrimmerPrimer Bulb Before Starting EngineHOW to Stop Your Unit HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineOperating Position Twist and EdgeTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels Clean AIR FilterCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsLine Replacement Installing Spool with LineCarburetor Adjustment Refilling the Spool with LineTroubleshooting Table Cause Remedy Seasonal StorageFuel System EngineSpecifically recommended by Improve its products. Therefore

530086935 specifications

The Weed Eater 530086935 is a reliable and efficient string trimmer designed for homeowners and gardeners seeking a powerful, easy-to-use tool for maintaining their outdoor spaces. This versatile equipment is engineered to make lawn care tasks more manageable, whether you are tackling overgrown grass, weeds, or trimming around fences and trees.

One of the standout features of the Weed Eater 530086935 is its powerful engine, which offers a commendable balance of power and efficiency. This gas-powered trimmer is designed to handle tough vegetation, making it an ideal choice for homeowners with larger yards or areas requiring regular maintenance. The engine is engineered for optimal performance, with features that reduce emissions and enhance fuel efficiency, ensuring that you can work longer with fewer interruptions.

The cutting head of the Weed Eater 530086935 is equipped with a dual-line spool system that allows for a 0.080-inch line diameter. This feature ensures that you can achieve a clean, precise cut while minimizing downtime on line replacement. The easy-loading spool mechanism allows users to quickly reload the trimmer line, making it more convenient to switch tasks and keep the trimmer operational.

The adjustable handle is another significant characteristic of this trimmer, providing users with added comfort and control during operation. The ergonomic design helps reduce fatigue during prolonged use, allowing you to tackle larger areas without discomfort. Furthermore, this trimmer features a straight shaft, which is suitable for reaching under shrubs and around obstacles, enhancing versatility.

The Weed Eater 530086935 also incorporates various user-friendly technologies, including a simple start system that minimizes the effort required to start the engine. This important feature is particularly advantageous for those who may struggle with traditional pull-start mechanisms.

In terms of maintenance, the trimmer's design facilitates easy access to vital components, ensuring that routine checks and repairs are hassle-free. The Weed Eater 530086935 strikes a perfect balance between power, efficiency, and ease of use, making it an excellent investment for anyone looking to keep their lawn and garden well-groomed. With its combination of advanced features and thoughtful design, this trimmer stands out as a dependable choice in the world of outdoor power equipment.
Top Page Image Contents