Weed Eater 530086935 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 7

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

EDGING-- Adjust trimmer to the edging posi- tion (see TWIST AND EDGE section). Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Edging

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter Cover

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Unit / Maintenance Safety Operator SafetyFuel Safety Operator Cutting SafetyTransporting and Storage Attaching ShieldBefore Starting Engine ON/STOP Switch ChokeKnow Your Trimmer Primer BulbStarting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Operating PositionTwist and Edge Trimmer Line AdvanceCheck for Damaged or Worn Parts Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsRefilling the Spool with Line Line ReplacementInstalling Spool with Line Carburetor AdjustmentEngine Troubleshooting Table Cause RemedySeasonal Storage Fuel SystemImprove its products. Therefore Specifically recommended by

530086935 specifications

The Weed Eater 530086935 is a reliable and efficient string trimmer designed for homeowners and gardeners seeking a powerful, easy-to-use tool for maintaining their outdoor spaces. This versatile equipment is engineered to make lawn care tasks more manageable, whether you are tackling overgrown grass, weeds, or trimming around fences and trees.

One of the standout features of the Weed Eater 530086935 is its powerful engine, which offers a commendable balance of power and efficiency. This gas-powered trimmer is designed to handle tough vegetation, making it an ideal choice for homeowners with larger yards or areas requiring regular maintenance. The engine is engineered for optimal performance, with features that reduce emissions and enhance fuel efficiency, ensuring that you can work longer with fewer interruptions.

The cutting head of the Weed Eater 530086935 is equipped with a dual-line spool system that allows for a 0.080-inch line diameter. This feature ensures that you can achieve a clean, precise cut while minimizing downtime on line replacement. The easy-loading spool mechanism allows users to quickly reload the trimmer line, making it more convenient to switch tasks and keep the trimmer operational.

The adjustable handle is another significant characteristic of this trimmer, providing users with added comfort and control during operation. The ergonomic design helps reduce fatigue during prolonged use, allowing you to tackle larger areas without discomfort. Furthermore, this trimmer features a straight shaft, which is suitable for reaching under shrubs and around obstacles, enhancing versatility.

The Weed Eater 530086935 also incorporates various user-friendly technologies, including a simple start system that minimizes the effort required to start the engine. This important feature is particularly advantageous for those who may struggle with traditional pull-start mechanisms.

In terms of maintenance, the trimmer's design facilitates easy access to vital components, ensuring that routine checks and repairs are hassle-free. The Weed Eater 530086935 strikes a perfect balance between power, efficiency, and ease of use, making it an excellent investment for anyone looking to keep their lawn and garden well-groomed. With its combination of advanced features and thoughtful design, this trimmer stands out as a dependable choice in the world of outdoor power equipment.
Top Page Image Contents