Weed Eater 530086927 Clean AIR Filter, Check for Loose, Fasteners and Parts, Check for Damaged or

Page 7

angle. Allow the tip of the line to strike the

the surfaces being swept and move the tool

ground around trees, posts, monuments, etc.

from side to side.

This technique increases line wear.

Sweeping

Scalping

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MOWING -- Your trimmer is ideal for mowing

EDGING-- Adjust trimmer to the edging posi-

in places conventional lawn mowers cannot

tion (see TWIST AND EDGE section). Allow

reach. In the mowing position, keep the line

only the tip of the line to make contact. Do not

parallel to the ground. Avoid pressing the

force trimmer line into work area.

head into the ground as this can scalp the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ground and damage the tool.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edging

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mowing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SWEEPING -- The fanning action of the rotat-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ing line can be used for a quick and easy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clean up. Keep the line parallel to and above

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING: Disconnect the spark

CLEAN AIR FILTER

 

A dirty air filter decreases engine perform-

plug before performing maintenance except

ance and increases fuel consumption and

for carburetor adjustments.

harmful emissions. Always clean after every

CHECK FOR LOOSE

5 hours of operation.

FASTENERS AND PARTS

1. Clean the cover and the area around it to

 

keep dirt from falling into the carburetor

S

Spark Plug Boot

 

 

chamber when the cover is removed.

S

Air Filter

 

2.

Remove parts as illustrated.

S

Housing Screws

NOTE: To avoid creating a fire hazard or

S

Assist Handle Screws

producing harmful evaporative emissions, do

S

Debris Shield

not clean filter in gasoline or other flammable

CHECK FOR DAMAGED OR

solvent.

WORN PARTS

3. Wash the filter in soap and water.

Contact an authorized service dealer for re-

4.

Allow filter to dry.

placement of damaged or worn parts.

5. Add a few drops of oil to the filter; squeeze

S ON/STOP Switch -- Ensure ON/STOP

 

the filter to distribute oil.

 

switch functions properly by pushing and

6.

Replace parts.

 

releasing the switch. Make sure engine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air Filter

 

stops. Wait 5 seconds before attempting to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

restart unit to allow switch to reset. Restart

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screws

 

engine and continue.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S Fuel Tank -- Discontinue use of unit if fuel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tank shows signs of damage or leaks.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S Debris Shield -- Discontinue use of unit if

 

Air Filter Cover

 

debris shield is damaged.

 

 

REPLACE SPARK PLUG

INSPECT AND CLEAN UNIT AND

Replace the spark plug each year to ensure

LABELS

the engine starts easier and runs better. Set

S After each use, inspect complete unit for

spark plug gap at 0.025 inch. Ignition timing is

 

loose or damaged parts. Clean the unit and

 

fixed and nonadjustable.

 

labels using a damp cloth with a mild deter-

 

1.

Twist, then pull off spark plug boot.

 

gent.

 

2. Remove spark plug from cylinder and dis-

S

Wipe off unit with a clean dry cloth.

 

card.

3. Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4. Reinstall the spark plug boot.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Unit / Maintenance Safety Operator SafetyFuel Safety Operator Cutting SafetyTransporting and Storage Attaching ShieldBefore Starting Engine ON/STOP Switch ChokeKnow Your Trimmer Primer BulbStarting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Operating PositionTwist and Edge Trimmer Line AdvanceFasteners and Parts Clean AIR FilterInspect and Clean Unit Check for LooseFuel System Line ReplacementCarburetor Adjustment Seasonal StorageTroubleshooting Table Cause Remedy Agency and POULAN/WEED EATER, Divi

530086927 specifications

The Weed Eater 530086927 is a versatile and powerful tool designed for homeowners and landscaping professionals alike. This gas-powered string trimmer offers a perfect balance of performance, ergonomics, and convenience, making it an ideal choice for trimming grass and weeds around the yard.

One of the standout features of the Weed Eater 530086927 is its robust 25cc two-cycle engine. This engine delivers reliable power and efficiency, allowing users to tackle even the toughest overgrown areas with ease. The engine’s design ensures smooth operation and reduces emissions, making it an environmentally friendly choice.

In terms of functionality, the Weed Eater 530086927 is equipped with a bump feed line advance system. This feature allows for quick and easy line replacement during use; users simply bump the trimmer head on the ground to release more line, ensuring continuous work without interruptions. The trimmer head accommodates .095-inch line, providing the cutting power necessary for heavy-duty tasks.

The ergonomic design of the Weed Eater 530086927 enhances user comfort, particularly during extended periods of use. It features a lightweight build, which minimizes fatigue and strain on the user. The adjustable handle allows for customizable operation angles, ensuring that users can maintain an ideal posture while trimming.

Additionally, the Weed Eater 530086927 boasts a straight shaft design. This characteristic not only enhances reach and maneuverability but also allows users to access tight spots and hard-to-reach areas with precision. The straight shaft is particularly beneficial for maintaining edges along sidewalks, fences, and garden beds.

Another notable technology incorporated into the Weed Eater 530086927 is its easy starting system. This ensures that users can get the trimmer running with minimal hassle, reducing the time spent on setup and allowing more time for yard work.

In summary, the Weed Eater 530086927 is a feature-rich, user-friendly string trimmer that combines power, efficiency, and comfort. Ideal for both casual users and professionals, it provides the necessary tools to keep your yard immaculate and well-maintained. Whether you are tackling simple maintenance or rough overgrowth, this trimmer is engineered to meet your needs effectively.
Top Page Image Contents