Line Replacement, Carburetor Adjustment

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2feet of 0.080! (2 mm) di- ameter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

SpoolSmall Holes

Line exit holes					Line in Notch

Line in Notch

Hub

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

CARBURETOR ADJUSTMENT

Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

530086927 specifications

The Weed Eater 530086927 is a versatile and powerful tool designed for homeowners and landscaping professionals alike. This gas-powered string trimmer offers a perfect balance of performance, ergonomics, and convenience, making it an ideal choice for trimming grass and weeds around the yard.

One of the standout features of the Weed Eater 530086927 is its robust 25cc two-cycle engine. This engine delivers reliable power and efficiency, allowing users to tackle even the toughest overgrown areas with ease. The engine’s design ensures smooth operation and reduces emissions, making it an environmentally friendly choice.

In terms of functionality, the Weed Eater 530086927 is equipped with a bump feed line advance system. This feature allows for quick and easy line replacement during use; users simply bump the trimmer head on the ground to release more line, ensuring continuous work without interruptions. The trimmer head accommodates .095-inch line, providing the cutting power necessary for heavy-duty tasks.

The ergonomic design of the Weed Eater 530086927 enhances user comfort, particularly during extended periods of use. It features a lightweight build, which minimizes fatigue and strain on the user. The adjustable handle allows for customizable operation angles, ensuring that users can maintain an ideal posture while trimming.

Additionally, the Weed Eater 530086927 boasts a straight shaft design. This characteristic not only enhances reach and maneuverability but also allows users to access tight spots and hard-to-reach areas with precision. The straight shaft is particularly beneficial for maintaining edges along sidewalks, fences, and garden beds.

Another notable technology incorporated into the Weed Eater 530086927 is its easy starting system. This ensures that users can get the trimmer running with minimal hassle, reducing the time spent on setup and allowing more time for yard work.

In summary, the Weed Eater 530086927 is a feature-rich, user-friendly string trimmer that combines power, efficiency, and comfort. Ideal for both casual users and professionals, it provides the necessary tools to keep your yard immaculate and well-maintained. Whether you are tackling simple maintenance or rough overgrowth, this trimmer is engineered to meet your needs effectively.