Weed Eater 530086725 instruction manual Troubleshooting Table Cause Remedy

Page 8

WARNING: Perform the following steps after each use.

S Stop the unit and disconnect the power source when not in use.

SCarry the unit with motor stopped.

SStore the unit so the line limiter blade can- not cause injury.

S Store unit and extension cord indoors in a high, dry place out of the reach of children. Store unit unplugged.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that require unit to be operating.

TROUBLE

CAUSE

REMEDY

Trimmer head

1.

Crowding trimmer line

1.

Allow tip of line to do the cutting.

stops under a

 

against material being

 

 

load or does not

 

cut.

2.

Contact your authorized service dealer.

turn when switch

2.

Electrical failure.

is pressed.

3.

Thrown circuit breaker.

3.

Check Breaker Box.

 

4.

Debris stopping head.

4.

Remove debris.

 

 

 

 

 

Line does not

1.

Line improperly routed

1.

Check line routing.

advance or

 

in head.

 

 

breaks while

2.

Line improperly

2.

Rewind line tightly and evenly.

cutting.

 

wound into spool.

3.

Use only 0.065 in. (1.65 mm) dia. line.

 

3.

Incorrect line size

 

4.

Not enough line

4.

Remove cover and pull 4 inches

 

 

outside of head.

 

(10 cm) of line out of head.

 

5.

Dirt buildup on unit.

5.

Clean unit.

Line welds onto

1.

Line size is incorrect.

1. Use only 0.065 in. (1.65 mm) dia. line.

spool.

2.

Incorrect spool.

2. Replace with correct spool.

 

3.

Line is being crowded

3. Cut with tip of line fully extended.

 

 

against material being

 

 

 

 

cut.

 

 

Line releases

1.

Line improperly

1. Check line routing.

continuously.

 

routed in head.

 

 

 

2.

Spool damaged.

2. Replace spool.

 

 

 

 

Line usage is

1.

Line improperly routed

1. Check line routing.

excessive.

 

in head.

 

 

 

2.

Line size is incorrect.

2. Replace spool.

 

3.

Crowding line against

3. Cut with tip of line fully extended.

 

 

material being cut.

4. Replace spool.

 

4.

Spool worn or damaged.

 

 

 

Line pulls back

1. Too little line outside

1. Remove cover and pull 4 inches

into head.

 

of head.

 

(10 cm) of line outside of head.

 

2. Line size incorrect.

2. Use only 0.065 in. (1.65 mm) dia. line.

8

Image 8
Contents Advertencia AvertissementOperator Safety Electrical SafetyUnit Safety Cutting SafetyMaintenance Safety Transporting and StorageAttaching the Shield Installation of Assist HandleAlign Installation Arrows Operating Instructions Correct Operating Position Advancing the Cutting LineBefore Each USE After Each USETroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC

530086725 specifications

The Weed Eater 530086725 is a compact yet powerful trimmer that has garnered attention for its efficient performance and user-friendly design. Designed primarily for residential use, this model is ideal for homeowners looking for a reliable tool to maintain their lawns and gardens.

One of the standout features of the Weed Eater 530086725 is its lightweight design. Weighing in at around 10 pounds, it is easy to maneuver, making it suitable for extended use without causing fatigue. This attribute is particularly advantageous for users with larger yards or those who need to navigate around various landscape elements.

Equipped with a robust 25cc 2-cycle engine, the Weed Eater delivers impressive power for its size. The engine is designed to start easily and maintain steady performance, which is critical for completing yard work efficiently. The combination of the powerful engine and the well-designed cutting system allows for effective trimming of grass and weeds of varying densities.

The 530086725 features an innovative auto-feed line system that automatically dispenses the right amount of trimmer line as needed. This not only enhances convenience but also reduces downtime spent on manual line adjustments. Users can focus more on their tasks, knowing that the trimmer will supply the line as required.

Another significant characteristic of this trimmer is its adjustable handle, providing added comfort and control during operation. The ability to customize the handle height ensures that users can find their ideal ergonomic position, promoting better handling and reducing strain on the arms and back.

The trimmer is equipped with a dual-line cutting head, which allows for a more efficient cut compared to single-line models. This feature increases productivity and makes it easier to tackle tougher vegetation.

Additionally, the Weed Eater 530086725 is designed with user safety in mind. The protective guard helps prevent debris from being thrown back at the user while trimming, and the trimmer's construction includes durable materials that can withstand the rigors of outdoor use.

Overall, the Weed Eater 530086725 combines practicality with performance in a lightweight package. Whether you are trimming edges or tackling tougher overgrowth, this trimmer offers the reliability and efficiency that many homeowners seek in lawn care tools. With its easy-to-use features and robust design, it stands out as a top choice for everyday gardening tasks.