Weed Eater 1000E instruction manual Installing Attachment Hanger, Operating Position, Edging

Page 7

INSTALLING ATTACHMENT HANGER

An attachment hanger is provided for storage when attachment is not in use.

To install hanger on attachment:

1.Remove the shaft cap from the attachment (if present) and discard.

2.Press and hold the locking/release button.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing. S Keep right arm slightly bent with right hand

holding the trigger handle of powerhead. S Keep left arm extended with left hand hold-

ing the handlebar.

S Keep unit below waist level.

S Adjust edger wheel for proper cut depth.

WARNING: Never attempt to adjust the edger wheel when the unit is in operation. Always stop the powerhead, wait until the blade stops turning, and disconnect the spark plug (or disconnect powerhead from power source) before making adjustments.

EDGING

As you become familiar with use of your edger attachment, you will be able to determine your own operating pace. Conditions such as depth of cut and material being cut will regu- late the speed and time required for your edg- ing job.

SAllow the engine to warm up before you begin edging.

SIncrease the engine speed before placing the blade in the cut. For best results, run the en- gine at full throttle while cutting.

S Always work going away from people and solid objects such as walls, large stones, trees, automobiles, etc.

SBe careful when edging near trees or valuable

plants. The high speed metal blade may cut roots and cause damage to the plants.

SIf the blade stalls, immediately move the unit back slightly to allow the blade to restart. If the blade continues to stall, stop the engine, dis- connect the spark plug, and inspect for block- age or damage.

WARNING: Keep the blade area clean. Always release the throttle trigger, move the powerhead ON/OFF switch to the OFF position, disconnect the spark plug (or disconnect powerhead from power source), and make sure the blade has completely stopped turning before cleaning.

SETTING THE EDGING DEPTH

WARNING: Never attempt to adjust the cut depth when the engine is running. Al- ways release the throttle trigger, wait until the blade stops turning, move the powerhead ON/OFF switch to the OFF position, and dis- connect spark plug (or disconnect from pow- er source) before making adjustments.

Depth Adjustment Knob

1.Loosen the depth adjustment knob.

2.Slide the wheel to the desired position.

S Raising the wheel will increase the cut- ting depth.

S Lowering the wheel will decrease the cutting depth.

3.Tighten the depth adjustment knob se- curely.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 22/04 Manual de Instrucciones Manuel d’InstructionsSafety Rules Identification of SymbolsOperator Safety Fastened Maintain unit according to recommended pro Cedures UNIT/MAINTENANCE SafetyInto water, return it to your authorized service for repair Rized service dealerTransporting and Storage Edging SafetyHandlebar Assembly AssemblyTools Required Know Your Edger Attachment Blade Depth Adjustment KnobInstalling Attachment OperationEdging Installing Attachment HangerSetting the Edging Depth Operating PositionService and Adjustments MaintenanceSeasonal Storage Limited WarrantyLightly oil external metal surfaces

1000E specifications

The Weed Eater 1000E is a versatile and efficient tool designed for homeowners and landscaping professionals alike, making yard maintenance easier and more effective. This electric string trimmer brings together power, innovation, and convenience to help you achieve a pristine lawn and garden.

One of the most distinctive features of the 1000E is its lightweight design. Weighing in at just around 5 pounds, this trimmer provides the user with ease of movement without sacrificing performance. The ergonomic handle is designed to provide a comfortable grip, reducing fatigue during extended use, while the adjustable telescoping shaft allows users of all heights to trim with proper posture for maximum comfort and control.

The 1000E boasts a powerful 1000-watt motor which delivers strong cutting performance, making it capable of tackling tough weeds and overgrown areas with ease. The electrical power eliminates the hassle of fueling or oiling a gas-powered unit, making it an environmentally friendly option for yard work.

Another key feature is its advanced dual-line cutting system, which provides a wider cutting path of 14 inches. This not only makes the trimming process quicker but also ensures a clean and precise cut. The automatic line feed mechanism allows for seamless line advancement, meaning users won’t have to worry about manually adjusting the line during operation.

The Weed Eater 1000E is equipped with safety features such as a safety guard that protects the user from debris while trimming, ensuring a safer working environment. The electric motor operates quietly, making it suitable for residential use even in noise-sensitive neighborhoods.

Additionally, the design of the Weed Eater 1000E allows for easy maintenance. The trimmer head can be easily accessed for line replacement, and the overall construction is sturdy enough to withstand regular use while being simple to clean after each job.

Overall, the Weed Eater 1000E combines innovation, efficiency, and user-friendly characteristics, making it an excellent choice for anyone looking to maintain their yard effortlessly. Whether you are trimming along sidewalks, edges, or dealing with unruly patches of grass, the 1000E stands out as a reliable tool that gets the job done effectively.
Top Page Image Contents