INSTALLATION
Before you mount the CD changer and its components, test it by temporarily making all the required connections.
Cautions:
•For added safety and to protect your CD changer and sound system, dis- connect the cable from your vehicle battery’s negative
•You must make all other connec- tions before you reconnect the cable to your vehicle’s battery. If you do not make the connections in the order shown, the CD changer and sound system might be damaged if any wire connections are made incorrectly.
Using RCA Jacks
If your vehicle’s sound system has a pair of RCA input jacks (either on the stereo head unit or the power amplifier), you can connect the CD changer to the sound system’s output jacks.
1.Use a screwdriver to slide ISOLA- TOR on the side of the Audio Adapter to ON.
2.Connect the Audio Adapter’s RCA output jack to the sound system’s RCA input jack by using a cable of the proper length for your connec- tion with 2 RCA plugs at each end. Your local RadioShack store carries a wide range of RCA cables.
CONNECTING THE AUDIO ADAPTER
The supplied Audio Adapter includes all of the lead wires for connecting to your vehicle’s, ground, power and sound sys- tem. There are two ways to connect the Audio Adapter to the CD changer and the vehicle’s sound system.
Using a Vehicle’s Antenna
If your vehicle’s sound system does not have RCA input jacks, use the Audio Adapter to convert the CD changer’s sound to an FM signal, which you can hear by tuning your vehicle’s radio to the corresponding FM frequency.
1.Disconnect your vehicle’s antenna from your vehicle’s sound system, then connect the antenna to the Audio Adapter’s large black antenna connector.
2.Connect the Audio Adapter’s antenna plug to your sound sys- tem’s antenna jack.
10