Cisco Systems 2654T6, STEV SRT-M-66 Reinstalling Components in the Router

REVIEW DRAFT—CISCO CONFIDENTIAL
A-19
Cisco XR 12416 Router Chassis Installation Guide
OL-xxxxx-xx
Appendix A Repackaging the Router
Repackaging the Routers
Reinstalling Components in the Router
If you elected to remove components from the chassis before removing it from the
rack, you must now reinstall all the components in the chassis.
Reinstalling the Cards in the Upper and Lower Card Cages
Reinstall all of the cards from the upper and lower card cages in their original
slots.
•Reinstall all of the cards in the upper card cage as instructed in the
“Reinstalling the Cards in the Upper Card Cage” section on page 3-52.
•Reinstall all of the cards in the lower card cage as instructed in the
“Reinstalling the Cards in the Lower Card Cage” section on page 3-53.
Caution Any unoccupied card slot in the upper or lower card cages must have a blank filler
panel installed for electromagnetic compatibility (EMC) and to ensure proper air
flow through the chassis. When the faceplate of a line card does not completely
fill the card slot opening, a narrow card filler panel must be installed for
electromagnetic compatibility (EMC) and to ensure proper air flow through the
chassis.
Reinstalling the Cards in the Switch Fabric Card Cage
Reinstall all of the cards from the switch fabric card cage in their original slots as
instructed in the “Reinstalling the Cards in the Switch Fabric Card Cage” section
on page 3-50.
Replacing the Blower Modules
Replace the blower modules as instructed in the “Reinstalling the Blower
Modules” section on page 3-47.
Reinstalling the Power Modules
If you removed AC-input power supplies from the chassis, reinstall each power
supply as instructed in the “Installing AC-Input Power Supplies” section on
page 3-75.