Appendix A Repackaging the Router
Repackaging the Routers
REVIEW DRAFT — CISCO CONFIDENTIAL
To reinstall the router and
Figure A-7 as a reference and follow these steps:
Step 1 Use the hand truck to move the chassis to a level, open space with a solid floor.
Step 2 Tilt the chassis upright so that it stands on the scissor-jack platform, then remove the hand truck.
Step 3 Use the bolts from the original shipping package to attach the eight hold-down brackets to the sides of the scissor-jack platform (two brackets on each side).
Note The
Step 4 Position the U-shaped pallet body behind the scissor-jack platform with the opening facing the back panel of the router.
Step 5 Use the 3/4-inch (19-mm) socket and ratchet wrench to turn the scissor-jack screw slowly counterclockwise to expand the scissor-jack platform and raise the top of the scissor-jack platform high enough for the hold-down brackets to clear the top of the pallet body.
Step 6 Slide the pallet body around the scissor-jack platform.
Step 7 Slide the pallet front bar into the opening on the pallet body and use the hinge locks to secure it as instructed in these steps:
a.Pivot the butterfly handle on the hinge lock up so that it is perpendicular to the body of the hinge lock.
b.Twist the butterfly handle counterclockwise to extend the hinge lock hook to its maximum reach.
c.Lower the hinge lock hook over the hinge lock catch on the pallet body.
d.Twist the butterfly handle clockwise to clamp the hinge lock hook on the hinge lock catch on the pallet body.
e.Pivot the butterfly lever down onto the hinge lock body so that it lies flat.
|
| Cisco XR 12416 Router Chassis Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|
