Appendix A Repackaging the Router
Repackaging the Routers
REVIEW DRAFT — CISCO CONFIDENTIAL
Repackaging the Miscellaneous Accessories
To repackage the all of the miscellaneous accessory pieces, follow these steps:
Step 1 Put the box containing the front cover for the power shelf and upper blower module into the large miscellaneous accessories box.
Step 2 Put all of the other miscellaneous accessory pieces in the box.
Step 3 Close and seal the carton.
Reassembling the Accessories Package
Figure A-2 shows an exploded view of the pieces that make up the accessories package for the router. To reassemble the accessory box package, use Figure A-2 on page A-5 as a reference and follow these steps:
Step 1 Place the bottom accessories package cap open side up on the floor.
Step 2 To insert the accessory boxes into their slots in the bottom cap, follow these steps:
a.Insert the box containing the center-mount rack-mounting brackets in the center slot closest to the back panel of the router.
b.Set the box containing the rack-mounting platform against the box containing the center-mount rack-mounting brackets.
c.Insert one vertical cable-management trough box on either side of the box containing the rack-mounting platform.
d.Place the miscellaneous accessories box on top of the rack-mounting platform box, between the two trough boxes.
Step 3 Place the top accessories package cap over the ends of the accessories boxes and push it down to hold all the boxes together.
| Cisco XR 12416 Router Chassis Installation Guide |
