Manuals / Radio Shack / Home Audio / CD Player

Radio Shack 10 Disc CD Changer owner manual Replacing A Fuse

Models: 10 Disc CD Changer

1 28

Download 28 pages 28.29 Kb

Page 25

REPLACING A FUSE

12-2182.fm Page 25 Friday, September 3, 1999 7:31 AM

REPLACING A FUSE

If the CD changer or its components do not operate, you might need to replace the fuse from one or more of the power wires with one of the supplied fuses. Check all fuses.

The fuse for the yellow power wire on the CD changer must be 5.0 amps. On the Audio Adapter, the red power wire’s fuse should be 0.5 amps, while the yel- low continuous power wire’s fuse must be 5 amps.

Warning: Before you begin, disconnect the cable from the vehicle battery’s neg- ative (–) terminal.

1.Unlatch the two latches on the fuse holder, so the holder springs open.

2.If a fuse is blown, replace it. Use only standard 11/4-inch fuses with the proper rating.

Caution: The supplied spare fuses have the proper ratings. Make sure you replace a fuse only with another fuse of the same rating.

3.Reassemble the fuse holder by squeezing it together.

4.Reconnect the cable to the vehicle battery’s negative (–) terminal.

25

Image 25

Radio Shack 10 Disc CD Changer owner manual Replacing A Fuse

Contents

10 Disc CD Changer FEATURES Track Search - lets you quickly locate the beginning of any track while playing a CD CONTENTS Power Cable A LOOK AT YOUR CD PLAYERCD Changer CD MagazineBEFORE YOU BEGIN PREPARATIONCHOOSING MOUNTING LOCATIONS For the Audio Adapter For the CD ChangerFor the CD Changer Controller REMOVING THE TRANSPORT SCREWSINSTALLING THE REMOTE CONTROL’S BATTERIES Follow these steps to install batteries CONNECTING THE AUDIO ADAPTER INSTALLATIONUsing RCA Jacks Using a Vehicle’s Antenna3.Connect the Audio Adapter’s black ground wire to a chassis ground, such as a metal screw attached to a metal part of the vehicle’ s frame. Be sure that the screw is not insulated from the chassis by a plastic part CONNECTING THE CD CHANGER CONTROLLER CONNECTING THE CD CHANGERMOUNTING THE COMPONENTS TESTING THE CONNECTIONSMounting the CD Changer Mounting the Audio Adapter Mounting the CD Changer Controller Reconnecting the Vehicle’s BatteryLOADING AND UNLOADING THE CD MAGAZINE OPERATIONLOADING AND UNLOADING THE CD CHANGER PLAYING CDS Using Track Skip Using Track SearchSelecting a CD Intro Scan SWITCHING BETWEEN THE CD PLAYER AND THE RADIORepeat Play Shuffle PlayRESET RESETTING THE AUDIO ADAPTERSymptom TROUBLESHOOTINGPossible Cause SuggestionPossible Cause SymptomSuggestion Set 88.7 MHz/89.1 MHz to a freCARE AND MAINTENANCE THE FCC WANTS YOU TO KNOW RESETTING THE CD CHANGERCD CARE TIPS REPLACING A FUSE CD CHANGER SPECIFICATIONSCONTROLLER/FM MODULATOR Page We Service What We Sell Limited One-YearWarrantyRadioShack A Division of Tandy Corporation Fort Worth, Texas