LOW AMP MID AMP High AMP | Nilfisk-ALTO DIGITAL X OVER guide

LOW AMP

MID AMP

HIGH AMP

AC INPUT

95-240V~60-50Hz

Rated Power Consumption 15W

FUSE:

210-240V: T250mAL 250VAC

95-120V: 500mA 250VAC

REPLACE FUSE WITH CORRECT TYPE ONLY

Apparaten skall anslutas till jordat uttag nar den ansluts till ett natverk

MODEL

SERIAL

PUSHPUSH

MIDI

OUTPUT

THRU

INPUT

OUTPUT6

OUTPUT5

OUTPUT4

OUTPUT3

OUTPUT2

OUTPUT1

INPUT2

INPUT1

MIXER

5.2.LTODRIVE3.4 2-Way Input, 6- Way Output (High, High, Low, Low, Sub, Sub Level)

If you want to present your LTODRIVE3.4 in a 2-way input, 6-way output (high, high, low, low, sub, sub level) application, please connect the unit to your system as the following illustration step by step:

1.Set the input /output path as the following connection:

ROUTING

PRESET 01

	3	U
	4	U
	4
	5	T
	6

1 / 1

2.Plug the left line-in into INPUT1and the right line-in into INPUT2.

3.Set the OUTPUT1, OUTPUT2, OUTPUT3, OUTPUT4,OUTPUT5, OUTPUT6 as high, high, low, low, sub, sub frequency band OUT separately.

4.Connect the OUTPUT1, OUTPUT2 to the high frequency amplifier,OUTPUT3, OUTPUT4 to the low frequency amplifier, OUTPUT5, OUTPUT6 to the low frequency amplifier.

SUB AMP