4.2.Operational Overview
At system startup the following splash screens will be shown on the graphic display.
ALTODRIVE3.4
Version1.0
Wait
Init System
The 
LTODRIVE is booting and initializing its hardware and software, loading the last used preset and the user interface. The process lasts a few seconds, afterwards the system goes to the Utility Menu (Utility Led is ON).
4.2.1 UTILITY MENU
The Utility menu is accessed by means of the Utility key (Utility Led is ON). The display shows as flowing figure:
UTILITY MENU
LOAD
STORE
MIDI
PRESET 01
PASSW
UNLOCK
Use Up/Down/Left/Right keys to select one of the five fields. Use Enter to access the selected
a. Load Preset
With this function it's possible to load one of the 65 available presets.
LOAD
Name: PRESET
Num: 01
LOAD
Name: PRESET
Num: 01
PRESET 01
1 / 1
PRESET 01 | 1 / 1 |
|
|
|
|
In this window the user can read the name, number and type of the currently loaded preset. 1/1 indicates the number of page; when it's selected it is possible to get back to the main menu pressing the Esc key. With the Up/Down key it's possible to select the preset or page number fields, selection is high lighted printing the item in reverse color.
To load a preset it is necessary to select the preset item; using the dial it is possible to choose the desired preset, to be confirmed pressing the Enter key.
If the user tries to load an empty preset, an error message (NO LOADING) is shown for some seconds. To go back to main menu, select page number, then press Esc.
b. Store Preset
With this function it's possible to store preset data into one of the 64 user available presets.
STORE
Name: EMPTY
Num: 02
PRESET 01
1 / 1
In this window the user can read the number of the location in which to save the current preset data. With the Up/Down key it's possible to select the preset or page number fields, selection is high lighted printing the item
in reverse color.
6