ANDLE
ELBOW
| CHUTE |
|
| TUBE | LATCH |
|
| |
|
| .__PtN |
| LATCH |
|
| ASSEMBLY | |
FIGURE 14 |
| JTE |
| EXTENSION | |
|
| |
TOP
\
\
CONTANEPt _
ELBOW
SHIELD
FIGURE 15
CHUTE _CHUTE
.EXTENSION E;
SHIELD
LATCH
ASSEMBLY
SPACER
_ASSEMBLY
HUTEAS£EMBLY
EXTENSION
ASSEMBLY
i,n
YOUR SPRING LOADED MOWER DEFLEC-
TOR SHIELD (FIG, 14} MUST NOT BE
REMOVED. SIMPLY ROTATE IT UP AND
HOLD IN UP POSITION WHILE AT-
TACHING CHUTE EXTENSION. THE
MOWER DEFLECTOR SHIELD CAN BE
RELEASED TO REST AGAINST CHUTE EX-
TENSION. THIS WILL ASSURE DEFLEC-
TOR SHIELD IS STILL ON MOWER IF
CHUTE EXTENSION OF GRASS CATCHER
ATTACHMENT IS REMOVED.
1 3. Assemble chute extension to mower housing.
a. Insert chute extension pin into latch assembly spacer (Fig. 14 - R.H. Inset).
b. Lift up slightly on L.H. side of chute extension lining up spacers located on latch assembly and chute extension.
c. Secure R.H side of chute extension to latch assembly using: retainer spring (shown full size below). Chute extension and retainer spring fur- nished with grass catcher.