PARTSIDENTIFICATION
COVER
ELBOW
//€'
30 GALLON
CONTAINER
CHUTE
TUBE
ASSEMBLY
EXTENSION
CHUTE
ASSEMBLY
FIGURE 1
MOWER BLADE CLUTCH LEVER "DISENGAGED"
POSITION
KEY
®
CHUTE LATCH
PIN
To assemble your grass catcher you will need:
(1) | 9/16" | wrench | (1} | screwdriver |
(2) | 1/2" | wrenches | (t) | 3/8" wrench |
(2) | 7/16" | wrenches |
|
|
(1} | 7/8" | wrench |
|
|
"CLUTCH/BRAKE"
POSITION
FIGURE 2
BRAKE
"ENGAGED"
GEAR SHIFT
LEVER /"
NOTE: RIGHT HAND (R.H.) AND LEFT HAND (L.H.) ARE DETERMINED FROM OPERATOR'S POSITION WHILE SEA TED ON THE TRACTOR.
ASSEMBLY-MOWER
READ THE "RULES FOR SAFE OPERA-
TION" CARFEULLY BEFORE OPERATING YOUR GRASS CATCHER,
DO NOT OPERATE MOWER WITH GRASS
CATCHER ASSEMBLY PARTIALLY INSTALLED.
All hardware for mower assembly found in bag labeled "Mower Deck Hardware".
1. Turn ignition key (Fig. 2) to "OFF" position.
i | ill l i i | i | II'IH'I |
REMOVE KEY TO PREVENT UNAUTHOR-
IZED USE,
MAKE ABSOLUTELY SURE THE BLADES AND ALL MOVING PARTS HAVE COM- PLETELY STOPPED.
2 , Push