TROUBLESHOOTING - See appropriate section in manual unless directed to a Sears Service Center.
PROBLEM |
| CAUSE | |
Does not start | 1, | Dirty air filter. | |
| 2. | Out of fuel. | |
| 3. | Stale | fuel. |
| 4. | Water | in fuel. |
| 5. | Spark | plug wire is |
|
| disconnected. |
CORRECTION
1.Clean/replace air filter.
2.Fill fuel tank.
3.Drain tank and refill with fresh, clean fuel.
4.Drain fuel tank and carburetor and refill tank with fresh gasoline.
5.Connect wire to plug.
6. | Bad spark | plug. | 6. | Replace | spark |
| plug. | |||
7. | Loose | blade or broken | 7. | Tighten | blade | bolt or | ||||
| blade | adapter. |
| replace | blade | adapter. | ||||
8. | Control | bar in released | 8. | Depress | control | bar to | ||||
| position. |
|
|
| handle. |
|
|
| ||
9. | Control | bar defective. | 9. | Replace | control | bar. | ||||
10. Fuel valve | lever (if so | 10.Turn | fuel valve |
| lever | |||||
| equipped) | in OFF position. |
| to the | ON position. |
1R