Sears 552493, 502493 manual Safety, Is involved

Page 3

SAFETY

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment.

Read and follow all instructions in this manual before attempting to assemble or operate this equipment. Failure to comply with these instructions may result in personal injury. Keep this manual in a safe place for future reference and for ordering replacement parts.

Read this operating and service instruction manual carefully.

Be thoroughly familiar with the controls and proper use of this power vacuum.

Read the vehicle owners manual and vehicle safe operation rules before using this equipment.

Never allow children under 16 to operate this Mow-N-Vac.

Children 16 years and older should only operate under close parental supervision.

Do not allow anyone to operate this equipment without proper instructions.

Do not allow passengers to ride on this equipment or on the towing vehicle.

Keep the area of operation clear of all persons, particularly small children. Also keep area clear of pets.

Check fuel before starting engine. Do not fill fuel tank indoors, or when engine is running, or while engine is hot. Wipe off any spilled fuel before starting engine.

Engine and muffler get hot. Do not touch! To avoid fire hazard, keep clean of debris and other accumulations.

Never store Mow-N-Vac with fuel in tank. Allow engine to cool before storing in any enclosure.

Do not change engine governor settings.

Do not operate engine if air cleaner or cover is removed, except for adjustment. Removal of these parts could create a fire hazard.

Keep hands, feet, face, long hair and clothing out of inlet and discharge area. There are ROTATING BLADES inside these openings.

Before cleaning, repairing or inspecting, make certain all moving parts come to a complete stop. Disconnect spark plug wire and keep wire away from plug to prevent accidental starting. Keep throttle control lever in stop position.

If the Mow-N-Vac should become blocked with debris at any point, shut engine off and wait until the impeller comes to a complete stop before attempting to remove the obstruction. Disconnect spark plug wire to prevent accidental starting.

If the cutting mechanism strikes a foreign object, or if your

Mow-N-Vac should start to vibrate abnormally, stop the engine immediately, disconnect the spark plug wire and move the wire away from the spark plug. Allow the machine to stop and take the following steps.

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for loose parts and tighten to assure

continued safe operation.

Check all bolts for tightness at frequent intervals to help insure safe operation.

Check vinyl hard top boot frequently for wear. Replace if worn or damaged.

Never operate Mow-N-Vac unless deck adapter, hose, hose adapter (nozzle), discharge chute (elbow), and top cover are properly attached in their place.

Do not remove top cover or attempt to empty contents of cart while engine is running.

Never attempt to change hose adapter (nozzle) or to install remote hose attachment when engine is running.

Keep all shields and guards (e.g. discharge chute (elbow) and hose adapter (nozzle) in place and securely attached.

Always wear safety glasses or other suitable eye protection when operating or maintaining this equipment.

Do not stand behind cart in exhaust discharge area while engine is running.

Do not operate this equipment while intoxicated or while taking drugs or medication that impairs the senses and reactions.

When using this equipment, start with the vehicle transmission in first (low) gear and then gradually increase speed only as conditions permit.

Operate this equipment at reduced speed on rough terrain, along creeks and ditches and on slopes to prevent tipping or loss of control. Do not drive too close to a creek or ditch.

Vehicle braking and stability are affected by the addition of this equipment. Do not fill the Mow-N-Vac to its full capacity without checking the capability of the towing vehicle to safely pull and stop with the Mow-N-Vac attached.

Before operating on any grade (hill) refer to the safety rules in the vehicle owner's manual concerning safe operation on slopes. Also refer to the SLOPE GUIDE on page 23 of this owner's manual. Do not operate on slopes in excess of 10 degrees. STAY OFF STEEP SLOPES.

Follow the maintenance instructions outlined in this manual.

Look for this symbol to point out important safety precautions. It means — Attention!! Become alert!!Your safety

is involved.

DANGER: This Mow-N-Vac was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This unit is capable of amputating fingers and hands and throwing objects.

Failure to observe the following safety instructions could result in serious injury or death.

3

Image 3
Contents Owners Manual 12 FT. Remote Hose KIT Table of ContentsIs involved SafetyTo avoid serious injury Hardware Package Contents Qty Description Assembling the Cart Body AssemblyTools Required for Assembly Removal of Parts from CartonsTruss Head Bolt Wheel Support Nylock NUT Assembling VAC Parts Cross Brace HEX Bolt Door Latch Hose Adapter Not Shown Full Size Assembling the Deck Adapter #62468 To the Mower DeckAdapter Bracket Directly to the Operation Instructions onBracket For 1990 and Newer Murray Tractors with a 38 or 40 DeckFor 1990 and Newer Murray Tractors with a 46 Deck MO Untin GOperation HOW to Stop Your CHIP-N-VACHOW to Start Your CHIP-N-VAC HOW to USE Your CHIP-N-VACUsing the Chipper Chute Maintenance Service and Adjustments StorageSharpening or Replacing Chipper Blades Problem Possible Causes Corrective Action TroubleshootingPart QTY Description PartsRepair Parts for Model 502493/552493 CHIP-N-VAC See 108 Slope Guide Page Page Repair Parts