Storage Instructions

Before running engine, clean muffler area to remove all combustible debris.

CLEAN

Clean and Replace Spark Plug

Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better.

.030" (0.76MM)

WIRE GAUGE

RESISTOR

Carburetor

The carburetor of your generator is pre-set at the factory. The carburetor should not be tampered with. If your gen- erator is used at an altitude in excess of 4000 feet perfor- mance may be affected. If so consult with your nearest Sears Service Center regarding high altitude set changes.

Governor

Your engine governor maintains the constant operating speed of your generator. DO NOT tamper with the engine governor which is factory set for proper engine speed.

Ifyou are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

CAUTION: Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

Engine Preparation

•Add fuel stabilizer to fuel tank to minimize the formation of fuel gum deposits during storage.

•Run engine at least 10 minutes after adding stabilizer to allow it to enter the fuel system.

•Next shut off engine.

Over-speeding your engine above factory high speed set- ting can be dangerous and could possibly cause personal injury or property damage. If you believe the engine is run- ning too fast or slow, take your generator to a Authorized Sears Service Center for repair and adjustment.

on the engine and when sufficient power is not avail- I I CAUTION: Low engine speeds impose a heavy load

able the engine life could be shortened.

•Disconnect the spark plug wire and remove the spark plug.

•Add one teaspoon of oil through the spark plug hole.

•Place rag over spark plug hole and pull the recoil a few times to lubricate the combustion chamber.

•Replace the spark plug, but do not connect the spark plug wire.

NOTE: If a fuel stabilizer is not used, all gasoline must be drained from the tank and carburetor to prevent gum deposits from forming on these parts and causing possible malfunction of the engine.

Generator

•Clean the generator as outlined on Page 14 (Generator Maintenance)

•Check that cooling air slots and openings on generator are open and unobstructed.

15 -- ENG

919.32721 specifications

The Sears 919.32721 is a remarkable addition to the world of portable electronics, boasting a unique intersection of functionality, style, and technological advancement. Primarily recognized as a versatile multimeter, this device serves not only as a measurement tool for electricians but also appeals to hobbyists and professionals alike.

One of the main features of the Sears 919.32721 is its comprehensive measurement capabilities. It excels in measuring voltage, current, and resistance, making it an essential tool for diagnosing electrical issues in a variety of applications. The device offers both AC and DC voltage measurements, covering a broad range from household circuits to automotive systems. This feature enhances its usability, ensuring that the device can cater to different needs across multiple fields.

The design and user interface of the Sears 919.32721 are crafted with user experience in mind. It features a clear, easy-to-read LCD display that provides accurate readings in real-time, allowing users to make quick decisions during troubleshooting. The buttons are intuitively placed, providing easy navigation through various functions and settings, and the overall ergonomics of the device ensure comfort during prolonged use.

Technologically speaking, the multimeter is equipped with advanced circuitry that enhances measurement precision and stability. It employs true RMS technology, which allows the meter to deliver accurate readings even in the presence of non-sinusoidal waveforms, thus making it more reliable for various applications. Additionally, the Sears 919.32721 has built-in safety features such as overload protection, which safeguards the device from damage in the event of improper usage.

Portability is another defining characteristic of the Sears 919.32721. It is compact and lightweight, making it easy to carry around in toolboxes or pockets. This mobility facilitates on-site measurements, which is a significant advantage for technicians and engineers who work in diverse environments.

In conclusion, the Sears 919.32721 stands out in the market for its robust feature set and user-friendly design. It bridges the gap between technology and usability, making it an indispensable tool for anyone involved in electrical measurements and diagnostics. Whether for professional use or DIY projects, this multimeter delivers reliability and precision, ensuring that users can tackle any electrical task with confidence.