McCulloch M19542H manual To Replace Mower Blade Drive Belt See Fig, To Check Brake

Page 22

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work belt around both mandrel pulleys and idler pulleys.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower (See "TO INSTALL MOWER" in this section of manual).

MANDRELIDLER

PULLEYPULLEYS

MANDREL

PULLEY

FIG. 24

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 25)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler (A) and clutching idler (B).

•Remove belt from centerspan idler (C).

•Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

•Remove belt downward from engine pulley (E).

•Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

•Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

•Pull belt toward front of tractor and roll belt onto engine pulley (E).

•Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

•Install belt on centerspan idler (C).

•Install belt through stationary idler (A) and clutching idler (B).

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” section in this manual).

 

E

 

F

A

 

B

G

 

C

 

D

02952

FIG. 25

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model NO. M19542H 19.5 HP 42 Inch Lawn Tractor General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig Check Battery See FigCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills Using the Reverse Operation SystemReverse Operation System ROS To Operate Mower See FigTowing Carts and Other ATTACH- Ments Before Starting the EngineTo Transport Check Engine OIL LevelPurge Transmission Mowing TipsAutomatic Transmission Warm UP Maintenance Lubrication ChartTractor BatteryBlade Removal See Fig Belts Transaxle MaintenanceEngine Transaxle CoolingCleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G Visual SIDE-TO-SIDE Adjustment See Fig To Level MowerTo Check Brake To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See Fig Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

M19542H specifications

The McCulloch M19542H is a robust and versatile lawn mower designed to cater to the needs of both residential and professional users. This high-performance machine boasts a combination of advanced technology and user-friendly features, making it a top choice for tackling various mowing tasks.

One of the standout features of the M19542H is its powerful 195cc engine. This engine is designed to provide exceptional torque and cutting power, enabling the mower to handle thick grasses and uneven terrains with ease. The reliable starting system ensures that users can begin their mowing sessions without the frustration of difficult starts, allowing for a smooth and efficient operation.

The mower is equipped with a wide 42-inch cutting deck, which not only allows for quick mowing of larger areas but also provides an adjustable cutting height. This feature grants users the flexibility to choose from several cutting heights, ensuring the perfect lawn finish whether aiming for a manicured look or a more natural appearance.

Another notable characteristic of the McCulloch M19542H is its innovative twin-blade system. This design enhances cutting efficiency, producing finely mulched grass clippings that can be recycled back into the lawn. This not only improves the overall health and appearance of the lawn but also reduces the amount of waste generated during the mowing process.

Comfort is paramount in the design of the M19542H. The adjustable ergonomic handle ensures that users can maintain a comfortable grip and posture while mowing, reducing fatigue during prolonged use. Additionally, the mower features a compact and maneuverable design, allowing for easy navigation around obstacles and tight spaces.

Safety is also a key consideration in the design of the McCulloch M19542H. The mower is equipped with various safety features, including a blade brake that stops the mower's blades when the user releases the handle, ensuring peace of mind during operation.

In terms of maintenance, the M19542H is designed for convenience. The easy-access oil and air filters make routine checks and replacements simple, promoting optimal performance longevity. Overall, the McCulloch M19542H combines power, efficiency, and user-friendly design, making it an excellent choice for anyone looking to maintain a pristine lawn with minimal effort.
Top Page Image Contents