McCulloch ZM3016BF/966564001 manual Blade Control Lever, Manual Transport, Seat Adjustment Lever

CONTROLS

Blade Control Lever

To engage the mower blades, slowly lift the lever up and into the the lock notch.

WARNING!

No adjustments or maintenance to be carried out unless:

•the engine stopped

•the ignition key removed

•the parking brake activated

Manual Transport

When pushing or pulling the mower, be sure to engage the EZT Hydrogear bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard.

•Raise the deck into the highest cutting position.

•Pull the EZT bypass linkages out and into the slots. Release linkages to hold in the bypass position.

•Release park brake.

•To reengage the EZT’s to drive, reverse the above procedure.

Seat Adjustment Lever

The seat can be adjusted lengthways. The lever is located at the right side of the seat (as seen by the driver in the seat). When making adjustments the lever is moved upward.

8058-074

Mower deck blade control lever in the disengaged position

8050-018

Set bypass linkages into slots on both sides

8058-124

Seat adjustment

22