McCulloch ZM3016BF/966564001 manual Front Wheel Mount, Front Wheel Bearings, Engine Lubrication

Page 42

LUBRICATION

Front Wheel Mount

Lubricate with a grease gun, one zerk for each wheel mount, until the grease is forced out.

Use only good quality bearing grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

Front Wheel Bearings

Lubricate with a grease gun, one zerk for each set of wheel bearings, until the grease is forced out.

Use only good quality bearing grease.

IMPORTANT INFORMATION

Use minimal lubrication and remove excess lubricant so that is does not come into contact with belts or belt pulley drive surfaces.

8050-009

Lubricating the wheel bearings

Engine Lubrication

Refer to the engine manufacturer's manual for maintenance and service instructions.

Steering Control Shafts

Tip the driver’s seat.

Lubricate with a grease gun, one zerk for each steering control shaft, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

8058-076

Lubricating the steering control shafts

42

Image 42
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Ignition Switch Parking BrakeThrottle Control Choke Control RefuelingTracking Fuel Shut Off ValveMower Deck Lifting Lever Always use the high position F to transportSeat Adjustment Lever Blade Control LeverManual Transport Training SteeringBefore Starting Starting the EnginePlace controls in neutral position Open the fuel valve Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Maintenance ScheduleEvery 50 hours Battery To clean battery and terminalsAlways use protective glasses when handling the battery Safety System Tire PressuresBelts Deck BeltTo replace deck belt EZT Belt Cutting BladesAdjusting the Mower Deck Leveling DeckUse protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLubrication GeneralEngine Lubrication Front Wheel MountFront Wheel Bearings Steering Control ShaftsTroubleshooting Problem CauseTroubleshooting Service Winter StorageSchematic Technical Data Torque SpecificationsStandard Hardware ZM3016 BF EngineTransmission Equipment Overall dimensionsRZ3019 BF ProductivityUSA Requirements CE RequirementsService Journal Delivery ServiceHour Service Perform the 25-hour service At Least Once Each Year Page 115 349327R1 03/19/10