McCulloch 96041018000 Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress brake pedal fully and set parking brake.

Place motion control lever in neutral position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 23)

Place attachment clutch in “DISENGAGED” position.

Lower attachment lift lever to its lowest position.

Roll belt off engine pulley (M) and belt keepers (G).

Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

Remove clutch cable spring (Q) from idler arm (R).

Disconnect front link (E) from mower - remove retainer spring and washer.

Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

CAUTION: AFTER REAR LIFT LINKS

ARE DISCONNECTED, THE ATTACH-

MENT LIFT LEVER WILL BE SPRING

LOADED. HAVE A TIGHT GRIP ON LIFT

LEVER WHEN CHANGING POSITION

OF THE LEVER.

Slide mower out from under right side of tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LINKS

(C)FROM TRACTOR AND HOOK THE CLUTCH SPRING

(Q)INTO THE CABLE GUIDE ON FRONT EDGE OF LOWER DASH.

TO INSTALL MOWER (See Fig. 23-28)

Be sure tractor is on level surface and engage parking brake.

Lower attachment lift lever to its lowest position.

CAUTION: LIFT LEVER IS SPRING

LOADED. HAVE A TIGHT GRIP ON

LIFT LEVER, LOWER IT SLOWLY AND

ENGAGE IN LOWEST POSITION.

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

Slide mower under tractor until it is centered under tractor.

G MF

RG

Q

P

A E

B

C

K

D

 

L

Fig. 23

 

 

18

Image 18
Contents OPERATOR’S Manual General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidTo Adjust Seat See Fig Check Tire PressureCheck Deck Levelness Operation Know Your Tractor ROS onPosition Stopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control See FigReverse Operation System ROS To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerTowing Carts and Other Attachments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceMaintenance ScheduleBattery TractorBlade Removal See Fig Engine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig Service and Adjustments To Install Mower See FigTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX01.11.10 JA

96041018000 specifications

The McCulloch 96041018000 is a powerful chainsaw designed for both professional use and homeowners seeking efficient tree maintenance solutions. Renowned for its reliability and performance, this model blends rugged construction with innovative technology, catering to a variety of cutting tasks.

One of the standout features of the McCulloch 96041018000 is its robust engine. Equipped with a potent 60cc two-stroke engine, this chainsaw delivers impressive cutting power, allowing users to tackle larger branches and trees with ease. This engine ensures high performance while maintaining relatively low emissions, complying with modern environmental standards.

The chainsaw sports a long-lasting 18-inch guide bar which strikes an excellent balance between optimal cutting capacity and maneuverability. This length is ideal for felling medium to large trees and making precise cuts. In addition, the chain is designed for fast cutting with minimal kickback thanks to its low-vibration technology, which enhances user safety and comfort during prolonged use.

User convenience is a central theme in the design of the McCulloch 96041018000. The chainsaw features an easy-to-access air filter, allowing for quick maintenance and improved airflow, enhancing engine performance over time. The automatic oiling system guarantees that the chain is consistently lubricated, reducing wear and prolonging the lifespan of both the chain and the bar.

Another key characteristic is the chainsaw's ergonomic design. It includes a soft-grip handle and an anti-vibration system, which minimizes fatigue during operation. This thoughtful design makes it easier for users to maintain control and precision when cutting, ultimately leading to better results.

Safety features are integral to the McCulloch 96041018000. It includes a chain brake that stops the chain instantly in the event of kickback, ensuring the user's safety, while the handguard protects against flying debris.

In summary, the McCulloch 96041018000 is a well-rounded chainsaw built for reliability and performance. With its powerful engine, optimal balance, user-friendly features, and enhanced safety systems, it stands as an excellent choice for anyone in need of a dependable cutting tool. Whether for professional landscaping or home maintenance, this chainsaw is poised to meet a variety of demands with ease.