To Level Mower

SERVICE AND ADJUSTMENTS

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 29)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

	A
Turn nut right	Turn nut left
to raise mower	to lower mower
02948

Fig. 29

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 30)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

	02966
A	A

Fig. 30

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 31 & 32) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

Fig. 31

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (tighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

TIGHTEN ADJUST		LOOSEN
		ADJUST NUT
NUT B TO RAISE
		B TO LOWER
MOWER
	02950	MOWER

LOOSEN JAM NUT A FIRST

Fig. 32

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

96041018000 specifications

The McCulloch 96041018000 is a powerful chainsaw designed for both professional use and homeowners seeking efficient tree maintenance solutions. Renowned for its reliability and performance, this model blends rugged construction with innovative technology, catering to a variety of cutting tasks.

One of the standout features of the McCulloch 96041018000 is its robust engine. Equipped with a potent 60cc two-stroke engine, this chainsaw delivers impressive cutting power, allowing users to tackle larger branches and trees with ease. This engine ensures high performance while maintaining relatively low emissions, complying with modern environmental standards.

The chainsaw sports a long-lasting 18-inch guide bar which strikes an excellent balance between optimal cutting capacity and maneuverability. This length is ideal for felling medium to large trees and making precise cuts. In addition, the chain is designed for fast cutting with minimal kickback thanks to its low-vibration technology, which enhances user safety and comfort during prolonged use.

User convenience is a central theme in the design of the McCulloch 96041018000. The chainsaw features an easy-to-access air filter, allowing for quick maintenance and improved airflow, enhancing engine performance over time. The automatic oiling system guarantees that the chain is consistently lubricated, reducing wear and prolonging the lifespan of both the chain and the bar.

Another key characteristic is the chainsaw's ergonomic design. It includes a soft-grip handle and an anti-vibration system, which minimizes fatigue during operation. This thoughtful design makes it easier for users to maintain control and precision when cutting, ultimately leading to better results.

Safety features are integral to the McCulloch 96041018000. It includes a chain brake that stops the chain instantly in the event of kickback, ensuring the user's safety, while the handguard protects against flying debris.

In summary, the McCulloch 96041018000 is a well-rounded chainsaw built for reliability and performance. With its powerful engine, optimal balance, user-friendly features, and enhanced safety systems, it stands as an excellent choice for anyone in need of a dependable cutting tool. Whether for professional landscaping or home maintenance, this chainsaw is poised to meet a variety of demands with ease.