McCulloch 96041018001 HOW to USE Your Tractor, To SET Parking Brake See Fig, Stopping See Fig

Page 10

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spec- tacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 6)

Your tractor is equipped with an operator presence sens- ing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal into full “BRAKE” position and hold.

•Place parking brake lever in “ENGAGED” position and release pressure from clutch/brake pedal. Pedal should remain in “BRAKE” position. Make sure parking brake will hold tractor secure.

•Never use choke to stop engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "STOP" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, al- ways stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely, as described above, before leav- ing the operator's position; to empty grass catcher, etc.

B C

Fig. 6

STOPPING (See Fig. 7)

MOWER BLADES -

•To stop mower blades,move attachment clutch lever to “DISENGAGED” position.

 

 

 

 

 

 

(

 

) ATTACHMENT

(

 

) ATTACHMENT

 

 

 

 

 

 

CLUTCH LEVER

 

 

CLUTCH LEVER

 

 

“DISENGAGED”

 

 

“ENGAGED”

Fig. 7

GROUND DRIVE -

•To stop ground drive, depress clutch/brake pedal into full “BRAKE” position.

•Move motion control lever to neutral position.

ENGINE -

•Move throttle control between half and full speed (fast) position.

NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping may cause engine to “backfire”.

•Turn ignition key to “STOP” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

TO USE THROTTLE CONTROL (See Fig. 8)

Always operate engine at full speed (fast).

•Operating engine at less than full speed (fast) reduces the engine's operating efficiency.

•Full speed (fast) offers the best mower performance.

DF

Fig. 8

TO MOVE FORWARD AND BACKWARD (See Fig. 9)

The direction and speed of movement is controlled by the motion control lever. (J)

J

Fig. 9

•Start tractor with motion control lever in neutral position.

•Release parking brake.

•Slowly move motion control lever to desired position.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Tire Pressure To Adjust Seat See FigCheck Deck Levelness Operation ROS on Know Your TractorPosition Stopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control See FigReverse Operation System ROS To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerTowing Carts and Other Attachments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelPurge Transmission Mowing TipsAutomatic Transmission Warm UP General Recommendations MaintenanceMaintenance ScheduleTractor BatteryBlade Removal See Fig Engine IN-LINE Fuel Filter See Fig CleaningDeck Washout Port See Fig To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX04.02.11 JA/TH

96041018001 specifications

The McCulloch 96041018001 is a highly regarded chainsaw designed for both professionals and tree care enthusiasts. Its robust performance and user-friendly features make it an ideal choice for tackling a variety of cutting tasks, whether it's trimming branches, felling trees, or cutting firewood.

One of the standout features of the McCulloch 96041018001 is its powerful gasoline engine. With a displacement of 40 cc, this engine generates sufficient power to handle demanding cutting jobs efficiently. The chainsaw boasts a maximum power output of approximately 1.5 kW, ensuring that it can tackle thick branches and trunks with ease. The engine is designed with efficient fuel consumption in mind, which not only saves operating costs but also reduces the environmental impact.

Equipped with a 14-inch guide bar, the McCulloch 96041018001 offers a perfect balance of reach and control. This length is ideal for a variety of applications, making it suitable for both light pruning and substantial cutting tasks. The chainsaw also features a chain brake system which provides added safety, preventing accidental kickback and ensuring user protection during operation.

An important aspect of the McCulloch 96041018001 is its Easy Start technology. This innovative feature allows for simpler starting with less effort, reducing the strain on the user and providing a quick readiness for work. Additionally, the chainsaw includes an automatic chain lubrication system that maintains optimal chain and bar performance, enhancing longevity and reducing wear during use.

The lightweight design of the McCulloch 96041018001 contributes to its ease of handling and maneuverability. Weighing in at just around 4.4 kg, operators can work longer without experiencing excessive fatigue, making it suitable for extended cutting sessions. Its ergonomic handle design adds to the overall comfort, ensuring a secure grip even in challenging conditions.

Moreover, the McCulloch 96041018001 features a tool-less chain tensioning system that allows users to adjust the chain tension quickly and easily, improving convenience and efficiency. Overall, this chainsaw strikes a commendable balance between power, safety, and ease of use, making it a valuable addition to any toolkit for those looking to tackle outdoor cutting tasks effectively.
Top Page Image Contents