McCulloch 96041018001 Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress brake pedal fully and set parking brake.

Place motion control lever in neutral position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 23)

Place attachment clutch in “DISENGAGED” position.

Lower attachment lift lever to its lowest position.

Roll belt off engine pulley (M) and belt keepers (G).

Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

Remove clutch cable spring (Q) from idler arm (R).

Disconnect front link (E) from mower - remove retainer spring and washer.

Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

CAUTION: AFTER REAR LIFT LINKS

ARE DISCONNECTED, THE ATTACH-

MENT LIFT LEVER WILL BE SPRING

LOADED. HAVE A TIGHT GRIP ON LIFT

LEVER WHEN CHANGING POSITION

OF THE LEVER.

Slide mower out from under right side of tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LINKS

(C)FROM TRACTOR AND HOOK THE CLUTCH SPRING

(Q)INTO THE CABLE GUIDE ON FRONT EDGE OF LOWER DASH.

TO INSTALL MOWER (See Fig. 23-28)

Be sure tractor is on level surface and engage parking brake.

Lower attachment lift lever to its lowest position.

CAUTION: LIFT LEVER IS SPRING

LOADED. HAVE A TIGHT GRIP ON

LIFT LEVER, LOWER IT SLOWLY AND

ENGAGE IN LOWEST POSITION.

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

Slide mower under tractor until it is centered under tractor.

G MF

RG

Q

P

A E

B

C

K

D

 

L

Fig. 23

 

 

18

Image 18
Contents OPERATOR’S Manual General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidTo Adjust Seat See Fig Check Tire PressureCheck Deck Levelness Operation Know Your Tractor ROS onPosition Stopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control See FigReverse Operation System ROS To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerTowing Carts and Other Attachments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceMaintenance ScheduleBattery TractorBlade Removal See Fig Engine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig Service and Adjustments To Install Mower See FigTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX04.02.11 JA/TH

96041018001 specifications

The McCulloch 96041018001 is a highly regarded chainsaw designed for both professionals and tree care enthusiasts. Its robust performance and user-friendly features make it an ideal choice for tackling a variety of cutting tasks, whether it's trimming branches, felling trees, or cutting firewood.

One of the standout features of the McCulloch 96041018001 is its powerful gasoline engine. With a displacement of 40 cc, this engine generates sufficient power to handle demanding cutting jobs efficiently. The chainsaw boasts a maximum power output of approximately 1.5 kW, ensuring that it can tackle thick branches and trunks with ease. The engine is designed with efficient fuel consumption in mind, which not only saves operating costs but also reduces the environmental impact.

Equipped with a 14-inch guide bar, the McCulloch 96041018001 offers a perfect balance of reach and control. This length is ideal for a variety of applications, making it suitable for both light pruning and substantial cutting tasks. The chainsaw also features a chain brake system which provides added safety, preventing accidental kickback and ensuring user protection during operation.

An important aspect of the McCulloch 96041018001 is its Easy Start technology. This innovative feature allows for simpler starting with less effort, reducing the strain on the user and providing a quick readiness for work. Additionally, the chainsaw includes an automatic chain lubrication system that maintains optimal chain and bar performance, enhancing longevity and reducing wear during use.

The lightweight design of the McCulloch 96041018001 contributes to its ease of handling and maneuverability. Weighing in at just around 4.4 kg, operators can work longer without experiencing excessive fatigue, making it suitable for extended cutting sessions. Its ergonomic handle design adds to the overall comfort, ensuring a secure grip even in challenging conditions.

Moreover, the McCulloch 96041018001 features a tool-less chain tensioning system that allows users to adjust the chain tension quickly and easily, improving convenience and efficiency. Overall, this chainsaw strikes a commendable balance between power, safety, and ease of use, making it a valuable addition to any toolkit for those looking to tackle outdoor cutting tasks effectively.